82
Appendix
Assembling the Clavinova
5.
Attach A.
5-1
Adjust the position of A so that the left and
right ends of A will project beyond E and F
equally (as seen from the rear).
5-2
Secure A using two 6 x 16mm short screws from
the rear.
5-3
Secure A using four 6 x 16mm short screws
from the front.
6.
Connect the speaker cord.
Insert the speaker cord plug into the connector
so that the protruding tab on the plug faces
toward right when viewed from the rear.
7.
Connect the pedal cord.
7-1
Insert the pedal cord plug into the [PEDAL]
connector.
7-2
Attach the cord holders to the instrument as
shown, then clip the cord into the holders. At
this time, be careful not to allow too much slack
in the pedal cord between the plug and cord
holder.
8.
Mount G.
Secure G using four thin screws (4 x 16 mm).
A
5-2
5-1
5-3
7-1
7-2
E
Insert the pedal cord
securely until the metal
part of the cord plug
disappears from view.
Otherwise, the pedal may
not function properly.
G
8
