Yamaha Clavinova CLP-411, Owner'S Manual

Page: 22 / 54

18
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Using the Recorder
Start Recording
................................................................................................
Recording will begin automatically as soon as you play a note on the
keyboard or press the [START/STOP] button. The current measure
number will appear on the display while recording.
NOTE
• The left pedal can be assigned to start and stop recording via the “Left
Pedal Mode” function described on page 25.
• If the metronome was on when you started recording, you’ll be able to
keep time with the metronome while recording, but the metronome sound
will not be recorded.
• You can record up to a maximum of about 4,200 notes, depending on
pedal usage and other factors. The [REC] button or record track indica-
tors will begin to flash when recorder memory is almost full. If the
memory becomes full during recording, “FUL” will appear on the display
and recording will stop automatically.
START/
STOP REC
RECORDER
CLP-411
START/
STOP
REC
RECORDER
START/
STOP
REC
RECORDER
CLP-411
Press twice.
CLP-411
START/
STOP
REC
RECORDER
CLP-411
Stop Recording
................................................................................................
Press either the RECORDER [REC] or [START/STOP] button to
stop recording.
The [REC] button indicator on the CLP-411 will go out. The indica-
tor of the recorded track on the CLP-511 will glow green to indicate
that it now contains data.
Erasing a Single CLP-511 Track
.....................................................
All data can be erased from either of the CLP-511 recorder’s tracks
by engaging the record mode, selecting the track you want to erase, and
then pressing the [START/STOP] button twice without recording any
data.
Changing the Initial Settings
.............................................................
The initial voice (including dual mode), damper pedal, soft pedal,
tempo, reverb type, reverb depth, and effect settings made in step 1 of the
recording procedure are actually recorded by the CLP-411/511. These
initial settings can be changed after the recording is finished by pressing
the [REC] button to engage the record ready mode (and pressing the
appropriate track button on the CLP-511), making the required changes,
and then pressing the [REC] button again to exit from the record ready
mode and register the changes. If you do this, be careful not to press the
[START/STOP] button or a key on the keyboard, either of which will
start recording and erase all previous recorded data on the CLP-411, and
all data on the selected track on the CLP-511. If you start this procedure
on the CLP-411 but decide to cancel, simply press the [REC] button a
second time without making any changes to exit. On the CLP-511 it is
possible to cancel the operation even after changes have been made:
change tracks and then press the [REC] button to exit from the record
mode (this also cancels data for the entire song).
NOTE
• The initial data of the “Dual mode functions (F3)” or “Split mode functions
(F4, CLP-511 only)” cannot be changed.
Erasing All Recorded Data On the CLP-411
.....................
All data can be erased from the CLP-411 recorder by engaging the
record mode and then pressing the [START/STOP] button twice
without recording any data.
START/
STOP REC 1 2
RECORDER
CLP-511
Press twice.