Yamaha CDR-HD1300 Owner'S Manual Download Page 18

Page: 18 / 106

E-

NAMES OF BUTTONS AND CONTROLS

Rear Panel

LINE IN — LINE OUT

OUT

DIGITAL

REC

COAXIAL

OPTICAL

COAXIAL

OPTICAL

RS–232C

VIDEO

OUT

S VIDEO

ANALOG

PLAY

CONNECTIONS

Turn off the power of this unit and the other components, and unplug them from the wall outlet before making any connections.

■

Digital connections

• This unit has the

DIGITAL OPTICAL

jacks and

DIGITAL COAXIAL

jacks. Connect either the

DIGITAL OPTICAL

jacks, or the

DIGITAL COAXIAL

jacks according to the component to be connected.

• Using the optical fiber cable, connect the

DIGITAL IN (OPTICAL)

jack on this unit to the digital optical output jack on the other

component, and the

DIGITAL OUT (OPTICAL)

jack on this unit to the digital optical input jack on the other component.

• When using the

DIGITAL IN/OUT (COAXIAL)

jacks, make connections with coaxial cables. Connect the

DIGITAL IN (COAXIAL)

jack

on this unit to the digital coaxial output jack on the other component, and the

DIGITAL OUT (COAXIAL)

jack on this unit to the digital

coaxial input jack on the other component.

■

Analog connections

• Make sure to connect the

(left) and

(right) input and output jacks on this unit to the correct

(left) and

(right) input and output jacks

on the other component.

• Connect the

ANALOG LINE IN

(REC)

jack on this unit to the analog output jack on the other component, and the

ANALOG LINE OUT

(PLAY)

jack on this unit to the analog input jack on the other component.

• The

ANALOG LINE IN (REC)/LINE OUT

(PLAY)

jacks on this unit are numbered

and

respectively. Connect these jacks to the

jacks with the same numbers when connecting this unit to a Yamaha amplifier or receiver.

• To connect the turntable directly to this unit, first connect it to the phono equalizer and then connect to the

ANALOG LINE IN

(REC)

jacks on this unit.

Notes

• When you play the data on the HDD or CDs, signals are output both from the

ANALOG LINE OUT

(PLAY)

jack and from the

DIGITAL

OUT (OPTICAL/COAXIAL)

jacks.

• Signals that are output through the

DIGITAL OUT

(OPTICAL)

jacks or the

DIGITAL OUT

(COAXIAL)

jacks while playing the data on

the HDD do not have information about the track markers. Therefore if these signals are recorded by an MD player, the track markers may
not be placed correctly on the recorded MD disc.

HDD slot

VIDEO OUT

jacks

S VIDEO

jack

VIDEO

jack

AC inlet

ANALOG

jacks

ANALOG LINE IN

(REC)

jacks

ANALOG LINE OUT

(PLAY)

jacks

DIGITAL

jacks

DIGITAL IN

(COAXIAL)

jack

DIGITAL IN

(OPTICAL)

jack

DIGITAL OUT

(COAXIAL)

jack

DIGITAL OUT

(OPTICAL)

jack

RS-232C

terminal

(U.S.A. model)

102_HD1300(E)01-13

02.6.24, 6:51 PM

Summary of Contents for CDR-HD1300











































































































Search results

Summary of Contents for CDR-HD1300

Reviews:

Related manuals for CDR-HD1300

Brands by name

Popular brands

Yamaha CDR-HD1300, Owner'S Manual

Search results

Summary of Contents for CDR-HD1300

Reviews:

Related manuals for CDR-HD1300

Brands by name

Popular brands