11
TUNING
Automatic tuning
1
Select TUNER by turning
INPUT
so that the
frequency of a radio station appears in the display.
2
Press
PRESET/BAND
to select the reception band.
Do not select the preset tuning mode (in which
“PRESET” appears on the display).
3
Press
AUTO/MAN’L
so that “AUTO” appears in the
display.
4
Press
PRESET/TUNING
(For a higher
frequency) or
(For a lower frequency).
5
The unit starts searching for a station.
When the unit finds a station, the unit stops searching
and “TUNED” appears on the display.
6
If the located station is not the one you want, repeat
steps 4 and 5 until a station you want is tuned.
Notes
• If automatic tuning search does not find the desired station, try
manual tuning as described next.
• When an FM stereo broadcast with sufficient signal strength is
received, “STEREO” appears on the display and you can listen
to stereo sound.
Listening to the radio
You can find radio stations automatically and manually.
Manual tuning
1
Follow steps 1 and 2 described in “Automatic
tuning.”
2
Press
AUTO/MAN’L
so that “AUTO” disappears
from the display.
3
Press
PRESET/TUNING
(For a higher
frequency) or
(For a lower frequency) to select
your desired station.
• Each time you press
PRESET/TUNING
or
,
the frequency changes step by step.
STEREO
AUTO
TUNED
PRESET/TUNING
/
PRESET/BAND
BALANCE
INPUT
VOLUME
L
R
TREBLE
BASS
PHONES
STANDBY/ON
TIMER
DISPLAY
MEMORY
NATURAL SOUND STEREO RECEIVER RX–E400
AUTO/MAN'L
PRESET/BAND
TIMER
HOUR
MIN
MIN
MAX
PRESET/TUNING
TIMER ADJ
+
–
+
–
INPUT
AUTO/MAN’L
0106CRXE500(U).11-12.E
02.7.9, 4:40 PM
11
