Yamaha CBX-K1XG, Owner'S Manual

Page: 49 / 72

App-8
The following RPN numbers can be received.
RPN DATA ENTRY
MSB LSB MSB LSB PARAMETER NAME and VALUE RANGE
00H 00H mmH - - Pitch Bend Sensitivity
mm : 00 - 18H (0 - 24 chromatic steps)
Assignable in chromatic steps up to 2
octaves
Default : 02H
LSB value is ignored.
00H 01H mmH 11H Fine Tuning
mm : 00H - 40H - 7FH (-64-0-+63)
00H 02H mmH - - Coarse Tuning
mm : 28H - 40H - 58H (-24 - +24 chro-
matic steps)
LSB value is ignored.
7FH 7FH - - - - RPN null
Cancels RPN and NRPN numbers.
1.5 Program Change
1100nnnn Cn
Status n=Channel number
0ppppppp pp Program # p=0...127
Messages for Voice selection.
With a combination of Bank Select, you can select not only basic Voice
numbers, but also variation Voice bank numbers.
If the Multi Part parameter Rcv PROGRAM CHANGE (page App-
14) = OFF, that Part will not receive Program Change messages.
When the C/M mode is active, program change messages for drum
Voices are ignored.
1.6 Channel Aftertouch
1101nnnn Dn
Status n=Channel number
0vvvvvvv vv
Value v=0...127
Messages which let you control various functions by the pressure you
apply to the keys after the initial striking of the keys, over the entire
channel.
If the Multi Part parameter Rcv CH AFTER TOUCH (CAT) (page
App-14) = OFF, that Part will not receive Channel Aftertouch.
1.7 Pitch Bend
1110nnnn En
Status n=Channel number
0lllllll ll Value LSB
0mmmmmmm mm
Value MSB
Messages for pitch bend wheel values.
If the Multi Part parameter Rcv PITCH BEND (page App-14) = OFF,
that Part will not receive Pitch Bend messages.
2. CHANNEL MODE MESSAGES
The following Channel Mode Messages can be received.
2nd BYTE 3rd BYTE MESSAGE
120 0 All Sounds Off
121 0 Reset All Controllers
123 0 All Notes Off
124 0 Omni Off
125 0 Omni On
126 0 ~ 16 Mono
127 0 Poly
2.1 All Sounds Off
1011nnnn Bn
Status n=Channel number
01111000 78
00000000 00
Terminates all sounds currently sounding on the specified channel.
However, the status of channel messages such as Note On and Hold
On is maintained.
2.2 Reset All Controllers
1011nnnn Bn Status n=Channel number
01111001 79
00000000 00
The values of the following controllers will be reset to the defaults.
CONTROLLER VALUE
Pitch Bend Change
±
0 (center)
Channel Aftertouch 0 (off)
Polyphonic Aftertouch 0 (off)
Modulation 0 (off)
Expression 127 (max)
Hold1 0 (off)
Portamento 0 (off)
Sostenuto 0 (off)
Soft Pedal 0 (off)
Portamento Control cancels the Portamento Source Key
Number that was received
RPN number not specified; internal data will
not change
NRPN number not specified; internal data will
not change
2.3 All Notes Off
1011nnnn Bn Status n=Channel number
01111011 7B
00000000 00
Terminates all notes currently on for the specified channel.
However, if Hold1 or Sostenuto is on, notes will continue sounding
until these are turned off.
2.4 Omni Off
1011nnnn Bn
Status n=Channel number
01111100 7C
00000000 00
Performs the same function as when an All Notes Off message is re-
ceived.
2.5 Omni On
1011nnnn Bn
Status n=Channel number
01111101 7D
00000000 00
Performs the same function as when an All Notes Off message is re-
ceived.
MIDI Data Format