PERIODIC MAINTENANCE AND MINOR REPAIR
6-20
6
EAU23500
Replacing the fuse
The fuse holder is located behind panel
B. (See page 6-5.)
If the fuse is blown, replace it as fol-
lows.
1. Turn the key to “
” and turn off all
electrical circuits.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
CAUTION:
ECA10640
Do not use a fuse of a higher amper-
age rating than recommended to
avoid causing extensive damage to
the electrical system and possibly a
fire.
3. Turn the key to “
” and turn on
the electrical circuits to check if the
devices operate.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
EAUM1410
Replacing a headlight bulb
If a headlight bulb burns out, replace it
as follows.
1. Place the scooter on the center-
stand.
2. Remove cowling A. (See page
6-5.)
3. Unhook the headlight bulb holder,
and then remove the defective
bulb.
1. Battery
2. Fuse
Specified fuse:
7.5 A
1
2
1
2
ZAUM0570
1. Unhook the headlight bulb holder.
2. Take the headlight bulb holder off.
3. Headlight bulb holder
1
2
3
ZAUM0571
Summary of Contents for BWS CW50
