manualshive.com logo in svg

Yamaha BRUIN 250, Owner'S Manual, Page: 66 / 174

Share
Download
Yamaha BRUIN 250 Owner'S Manual Download Page 66

7-3

WARNING

_ 

Indicates a potential hazard that could
result in serious injury or death.

GETTING TO KNOW YOUR ATV 

This ATV is for recreation and utility use. This
section, Riding your ATV, provides general
ATV riding instructions for recreational riding.
The skills and techniques described in this
section, however, are appropriate for all types
of riding. Riding your ATV requires special
skills acquired through practice over a period
of time. Take the time to learn the basic tech-
niques well before attempting more difficult
maneuvers.

Riding your new ATV can be a very enjoyable
activity, providing you with hours of pleasure.
But it is essential to familiarize yourself with
the operation of the ATV to achieve the skill
necessary to enjoy riding safely. Before you
begin to ride, be sure you have read this

Owner’s Manual completely and understand
the operation of the controls. Pay particular at-
tention to the safety information on pages
2-1–2-6. Please also read all caution and
warning labels on your ATV.

EE.book  Page 3  Wednesday, June 23, 2004  1:13 PM

Summary of Contents for BRUIN 250















































































































































































Reviews:

No comments