Yamaha BIGBEAR 250 Owner'S Manual Download Page 138

Page: 138 / 155

10-1

EBU25960

SPECIFICATIONS

Dimensions:

Overall length:

1916 mm (75.4 in)

Overall width:

1038 mm (40.9 in)

Overall height:

1118 mm (44.0 in)

Seat height:

772 mm (30.4 in)

Wheelbase:

1170 mm (46.1 in)

Ground clearance:

150 mm (5.9 in)

Minimum turning radius:

2900 mm (114 in)

Weight:

With oil and fuel:

216.0 kg (476 lb)

Engine:

Engine type:

Air cooled 4-stroke, SOHC

Cylinder arrangement:

Forward-inclined single cylinder

Displacement:

229.6 cm³ (14.01 cu.in)

Bore

stroke:

71.0

58.0 mm (2.80

2.28 in)

Compression ratio:

8.70 :1

Starting system:

Electric and recoil starter

Lubrication system:

Wet sump

Engine oil:

Type:

YAMALUBE 4, SAE5W30 or SAE10W30 or SAE20W40

Recommended engine oil grade:

API service SE, SF, SG type or higher

Engine oil quantity:

Without oil filter element removal:

1.50 L (1.59 US qt) (1.32 Imp.qt)

0˚

10˚

30˚

50˚

70˚

90˚

110˚

130˚F

YAMALUBE 4 (10W30) or SAE 10W30

SAE 5W30

-20˚

-10˚

0˚

10˚

20˚

30˚

40˚

50˚C

YAMALUBE 4 (20W40) or SAE 20W40

U1P012E0.book Page 1 Thursday, April 20, 2006 2:31 PM

Summary of Contents for BIGBEAR 250




























































































































































Search results

Summary of Contents for BIGBEAR 250

Reviews:

Related manuals for BIGBEAR 250

Brands by name

Popular brands

Yamaha BIGBEAR 250, Owner'S Manual

Search results

Summary of Contents for BIGBEAR 250

Reviews:

Related manuals for BIGBEAR 250

Brands by name

Popular brands