Yamaha BIG BEAR 250 YFM250Z, Owner'S Manual

Page: 62 / 140

7-6
7
opening, even when the throttle lever is pushed to
the maximum. Turning in the adjusting screw limits
the maximum engine power available and de-
creases the maximum speed of the ATV. Turning
in the adjusting screw decreases top speed, and
turning it out increases top speed. (See page 4-4.)
Loading and accessories
WARNING
EWB01461
Improper loading or towing can increase the
risk of loss of control, an overturn, or other ac-
cident. To reduce the risk of an accident:
● Do not exceed the maximum loading limits
for the vehicle (see box in this section or ve-
hicle labeling).
● Keep weight on racks centered side to side,
and as low as possible. Be sure cargo is se-
cured – a loose load could change handling
unexpectedly.
● Make sure the load does not interfere with
your control or ability to see where you are
going.
● Tie down cargo in the trailer securely. Make
sure cargo in the trailer cannot move around.
A shifting load can cause an accident.
● Reduce speed and allow more room to stop.
A heavier vehicle takes longer to stop.
● Avoid hills and rough terrain. Choose terrain
carefully. Use extreme caution when towing
or carrying a load on inclines.
● Turn gradually and go slowly.
Take extra precautions when driving with a load or
trailer. Follow these instructions and always use
common sense and good judgment when carrying
cargo or towing a trailer.
1. Adjusting screw
U1P065E0.book Page 6 Monday, August 31, 2009 1:10 PM