Yamaha BANSHEE 350, Owner'S Manual

Page: 109 / 169

8-8
7. Start the engine and warm up for a few
minutes. While warming up, check for oil
leakage. If oil leakage is found, stop the
engine immediately, and check for the
cause.
8. Turn the engine off, and then check the oil
level and correct it if necessary.
EBU01080
Cooling system
1. Check the coolant level in the coolant
reservoir when the engine is cold as the
coolant level will vary with engine temper-
ature. The coolant level should be
between the maximum and minimum
marks.
1. Maximum level mark
2. Minimum level mark
2. If the level is low, remove the seat. (See
page 4-12 for seat removal and installa-
tion procedures.)
q
w
3B5-9-10-03 3/31/05 1:37 PM Page 9