Yamaha BADGER, Owner'S Manual

Page: 99 / 141

EBU00263
Engine oil
1. Engine oil level measurement
a. Place the machine on a level place.
b. Warm up the engine for several minutes
and stop it.
c. Remove the dipstick and wipe it off with a
clean rag. Insert the dipstick in the filler
hole without screwing it in.
NOTE:
Wait a few minutes until the oil level settles
before checking.
d. Remove the dipstick and inspect the oil
level.
e. The oil level should be between the maxi-
mum and minimum marks. If the level is
low, add oil to raise it to the proper level.
c C
Be sure no foreign material enters the
crankcase.
1. Dipstick 2. Maximum level mark
3. Minimum level mark
2. Engine oil replacement
a. Place the machine on a level place.
b. Warm up the engine for several minutes
and stop it.
c. Place a container under the engine.
d. Remove the dipstick and drain plug to
drain the oil.
e. Inspect the O-ring and replace if damaged.
8-5
q
w
e