4
CONNECTIONS
●
Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
●
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L
(left) to L, R (right) to R, “+” to “+” and “–” to “–”. Also, refer to the owner’s manual for each component to be connected to this
unit.
●
If you have YAMAHA components numbered as
1
,
2
,
3
, etc. on the rear panel, connections can be made easily by making
sure to connect the output (or input) terminals of each component to the same-numbered terminals of this unit.
: Refer to “ABOUT THE OTHER REAR PANEL PARTS” on page 5.
TAPE 3
TAPE
PB
3
REC
OUT
4
REMOTE
CONTROL
PHONO
PHONO
SWITCHED
200W MAX. TOTAL
AC OUTLETS
VOLTAGE SELECTOR
GND
CD
TUNER
TAPE
PB
TAPE 1
REC
OUT
TAPE 2
MAIN
IN
PRE
OUT
COUPLER
AUX
A OR B:6
Ω
MIN./SPEAKER
A B:l2
Ω
MIN./SPEAKER
A
B
SPEAKERS
A
B
A OR B:6
Ω
MIN./SPEAKER
A B:l2
Ω
MIN./SPEAKER
REMOTE
CONTROL
OUTPUT
GND
OUTPUT
AUDIO OUT
LINE OUT
LINE IN
2
3
4
TAPE
PB
3
REC
OUT
4
1
LINE OUT
LINE IN
LINE OUT
LINE IN
OUTPUT
Compact disc player
Turntable
Video cassette player,
LD player, etc.
Tape deck 3
Speakers B
To AC outlet
(General model)
Right
Left
Right
Left
Tuner
Tape deck 1
Speakers A
AC OUTLETS (3 SWITCHED OUTLETS)
Use these to connect the power cords from your components
to this unit.
The power to the SWITCHED outlets is controlled by this unit’s
POWER switch or the provided remote control transmitter’s
POWER key. These outlets will supply power to any
component whenever this unit is turned on.
The maximum power (total power consumption of
components) that can be connected to the SWITCHED AC
OUTLETS is 200 watts.
Tape deck 2
