background image

CONSUMER PRECAUTIONS

2

Read these precautions carefully before setting up your NS-AW570 speakers. 

When installing these speakers outdoors, try to minimize their exposure to rain and snow by mounting the 
speaker in corners or under eaves. 

Since these speakers can be wall mounted, it is essential that they are firmly secured. 

Be sure to consult a 

reliable source about the best type of hanger for your particular wall’s construction. Secure 
installation is the purchaser’s responsibility. 

Do not attach them to thin plywood or soft wall surface materials as the screws may tear free, causing the 
speakers to fall and be damaged, or result in personal injury. 

Do not fasten the speakers to walls with nails, adhesives, or other unsafe hardware. Long-term use and 
vibrations may cause them to pull free. 

Do not place the speakers where they are liable to be knocked over or struck by falling objects. Stable 
placement will also ensure better sound performance. 

Placing the speakers on the same stand or shelf as a turntable can result in feedback. 

Never touch the woofer or tweeter units with your hands or expose them to excessive physical shock. If they 
are dented or bent, the sound will be distorted. 

Lower the power amplifier / receiver volume control before changing input sources. Never change input 
sources (for example, FM to CD) at high listening levels. Always turn the receiver / amplifier unit off when 
installing or removing input cables. 

Anytime you note distortion, reduce the volume control on your power amplifier / receiver to a lower setting. 
Never allow your power amplifier to be driven into “clipping”. 

Do not attempt to clean the speakers with chemical solvents as this might damage the finish. To clean wipe 
with a dry, soft cloth. 

Secure placement or installation is the owner’s responsibility.  

YAMAHA shall not be liable for any accident caused by improper placement or installation of speakers.

Summary of Contents for AW570WH - Left / Right CH Speakers













Reviews: