3. Press
the
[TRACK SEL]
key of the track that you want to record on.
The selected input channel will now be connected to the selected track. Both the
selected
[INPUT SEL]
key and the selected
[TRACK SEL]
key will be blinking red and
there will be a line connecting the two on the screen.
there will be a line connecting the two on the screen.
4.
Raise the fader of the track that you are recording on to the 0 mark.
4.
Raise the fader of the track that you are recording on to the 0 mark.
Recording the First Track
Recording the First Track
You are now ready to record. To begin
recording, simultaneously press the
[PLAY]
and
[REC]
keys in the transport section. The
[PLAY]
and
[REC]
keys will light up, and the
AW16G will begin recording.
You are now ready to record. To begin
recording, simultaneously press the
[PLAY]
and
[REC]
keys in the transport section. The
[PLAY]
and
[REC]
keys will light up, and the
AW16G will begin recording.
Punch In/Out
If you make a mistake while recording you can punch-in at the spot that
the mistake was made. To punch-in simply means to start recording again at the
point where the mistake was made. To perform a punch-in, first rewind the
AW16G to a few seconds before the mistake. Next, press the
[PLAY]
key in the
transport section and when you get to the point where the mistake was made
simultaneously press the
[PLAY]
and
[REC]
keys and record over the mistake.
9
