Yamaha AW 16G, Owner'S Manual

Page: 76 / 219

Using libraries and scene memories
76
Naming library or scene data
Here’s how you can assign a new name to existing
library or scene data.
Note Note
The input library and mastering library, and the EQ,
dynamics, or effect libraries accessed from the INPUT
SETTING popup window are all read-only, and therefore
have no TITLE button.
1
Access the page for the desired library or
scene memory.
The illustration below shows an example of when
you have selected the LIBRARY page of the EQ
screen.
2
Turn the [DATA/JOG] dial to scroll the list so
that the library data or scene you want to
rename is enclosed by the dotted frame.
3
Move the cursor to the TITLE button and
press the [ENTER] key.
The TITLE EDIT popup window will appear.
Note Note
If you selected read-only data (indicated by a “lock”
icon) in step 2, a message of “Read Only” will appear,
and you will be unable to edit the name.
4
Assign a name to the data. Then move the
cursor to the OK button and press the
[ENTER] key. (For details on assigning a name
→
p. 24)
The edited name will be finalized.