Yamaha AW 1600, Service Manual

Page: 74 / 127

AW1600
74
■
DISPLAY MESSAGE LIST
• Messages
* A “region” is a continuous segment of audio data recorded on one track.
A/B POINTS NOT FOUND Repeat Playback cannot be performed because A/B points are not specified.
CANNOT DEFEAT MUTE Mute cannot be disengaged because the simultaneous playback limit will be exceedced.
CANNOT REDO! Redo (re-execution of an operation) is not possible.
CANNOT SET MARK It is not possible to specify a mark at an already-specified position.
CANNOT UNDO! Undo (cancellation of an operation) is not possible.
CD PLAY MODE NOW Since the AW1600 is in CD Play mode, this operation cannot be executed.
CH. PARAMETER INITIALIZED The mixer parameters of the channel have been initialized.
DIFFERENT TC FRAME TYPE MTC of a different frame type than the internal setting is being received.
DISK BUSY!! The reading speed of the internal hard disk is not fast enough, or the reading speed has slowed down
because the recorded data has become fragmented.
DISK FULL!! There is insufficient space on the internal hard disk.
IN/OUT POINTS NOT FOUND Auto-punch recording cannot be performed because in/out points are not specified.
IN/OUT POINTS REVERSE ORDER In/out points are set in wrong order.
IN/OUT POINTS TOO CLOSE The auto punch-in/out interval is too short. It cannot be set less than approximately 100 msec.
LIBRARY: FOR EFFECT2 ONLY. The selected parameter is for Effect 2 only.
LIBRARY: PROTECTED. The selected parameter is protected.
LIBRARY: READ ONLY. The selected parameter is read-only.
LOCATE POINT ERASED The locate point has been erased.
LOCATE POINT SET The locate point has been set.
MARK POINT ERASED The mark has been erased.
MARK POINT SET The mark has been set.
MEMORY FULL!! There is no more free space in sampling pad memory.
MIDI IN: DATA FRAMING ERROR! Invalid MIDI data may have been received.
MIDI IN: DATA OVERRUN! Invalid MIDI data may have been received.
MIDI: RX BUFFER FULL! Receiving more MIDI data than it can handle.
MIDI: TX BUFFER FULL! Attempting to transmit more MIDI data than it can handle.
MTC SLAVE MODE NOW Since the AW1600 is in MTC Slave mode, this operation cannot be executed.
NO MARK LEFT The allowable number of marks has been exceeded.
RECORD TRACK NOT SELECTED Recording cannot be performed because you have not selected a record track.
RECORDER BUSY! The operation cannot be executed because the recorder is operating.
RECORDER RUNNING NOW Since the recorder is recording or playing, this operation cannot be executed.
REDO COMPLETED Redo (re-execution of the previous operation) has been completed.
REPEAT POINTS TOO CLOSE The repeat interval is too short. It cannot be set to less than one second.
SELECTED PAD NOT ASSIGNED. No sample is assigned to the selected pad.
SOUND CLIP MODE NOW Since the AW1600 is in Sound Clip mode, this operation cannot be executed.
STEREO TRACK PLAYBACK MODE Since the AW1600 is in Stereo Track Playback mode, this operation cannot be executed.
THIS SONG IS PROTECTED. This song is protected, and cannot be edited or recorded.
TOO MANY REGIONS!! The maximum allowable number of regions* has been exceeded.
UNDO COMPLETED Undo (cancellation of the previous operation) has been executed.
USB STORAGE MODE NOW Since the AW1600 is in USB Storage mode, this operation cannot be executed.
WRONG WORD CLOCK An inappropriate word clock is being received from the connected device to which you are synchronizing.