Yamaha AVENTAGE RXA780BL Owner'S Manual Download Page 137

Page: 137 / 201

Configuring the multi zone settings

Checking the Zone2 information

Displays information about Zone2.

Setup menu

“Multi Zone” > “Information”

On/Off

The power on/off for Zone2

Input

The input source selected for Zone2

Volume

The volume setting for Zone2

Tone Control

The tone control setting (the level of Treble and Bass) for Zone2

NOTE

Use the left/right cursor keys to display other informations in the “Setup” menu.

Setting the use of volume adjustments for Zone2

output

Enables/disables volume adjustments for Zone2 output.
If you have connected an external amplifier with volume control to the unit, disable
volume adjustments for Zone2.

Setup menu

“Multi Zone” > “Zone2” > “Volume”

Settings

Fixed

Disables volume adjustments for Zone2 output.

Variable

Enables volume adjustments for Zone2 output.

NOTE

“Volume” is automatically set to “Variable” when “Power Amp Assign” is set to “7.1 +1Zone” or “5.1.2

+1Zone”. For details on “Power Amp Assign” in the “Setup” menu, see the following:

▪ “Setting your speaker system” (p.109)

Setting the Zone2 limit value of the volume

Sets the Zone2 limit value of the volumes.

Setup menu

“Multi Zone” > “Zone2” > “Max Volume”

Setting range

-60.0 dB to +10.0 dB (5.0 dB increments) [20.5 to 90.5 (5.0 increments)]

NOTE

▪ This setting is not available when “Volume” is set to “Fixed”. For details, see the following:

– “Setting the use of volume adjustments for Zone2 output” (p.137)

▪ For details on the scale of the volume display (dB unit or numeric value), see the following:

– “Setting the scale of the volume display” (p.146)

137

Summary of Contents for AVENTAGE RXA780BL










































































































































































































Search results

Summary of Contents for AVENTAGE RXA780BL

Reviews:

Related manuals for AVENTAGE RXA780BL

Brands by name

Popular brands

Yamaha AVENTAGE RXA780BL, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RXA780BL

Reviews:

Related manuals for AVENTAGE RXA780BL

Brands by name

Popular brands