manualshive.com logo in svg

Yamaha AVENTAGE RX-A880, Owner'S Manual

The Yamaha AVENTAGE RX-A880 is a top-notch audio receiver that delivers exceptional sound quality and immersive surround sound experience. To get the most out of this remarkable device, make sure to download the comprehensive Owner's Manual from our website for free. Learn how to optimize your audio settings and unlock the receiver's full potential.

Share
Download
background image

TROUBLESHOOTING

When any problem appears

If trouble occurs, first check the following:

Make sure of the following when the unit does not function properly.

• The power cables of the unit, TV and playback devices (such as BD/DVD players)

are connected to AC wall outlets securely.

• The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned

on.

• The connectors of each cable are securely inserted in to jacks on each device.

If there is no problem with the power and cables, refer to the instructions shown in

“When any problem appears” corresponding to the trouble of the unit.
If the problem you are experiencing is not listed or if the instructions do not help, turn
off the unit, disconnect the power cable, and contact the nearest authorized Yamaha
dealer or service center.

Power, system, or remote control trouble

n

The power does not turn on

l

The protection circuitry has been activated three times consecutively.

  If the standby indicator on the unit blinks when you try to turn on the power, as a

safety precaution, capability to turn on the power is disabled. Contact your nearest
Yamaha dealer or service center to request repair.

 

 

 

n

The power does not turn on in synchronization with the
TV

l

HDMI Control on the unit is disabled.

  If turning off the unit is not synchronized to the TV either, check the setting of HDMI

Control on the unit. For details on HDMI Control, see the following:

– “Setting the use of HDMI Control” (p.130)

l

HDMI Control on the TV is disabled.

  If only turning on the unit is not synchronized to the TV, check the setting on the

TV. For details, refer to the instruction manual for the TV and set HDMI Control on
the TV.

l

Because of a power failure, the unit's power is no longer synchronized.

  Disconnect the HDMI cables and power cables, and after five minutes, reconnect

the cables of playback devices first, then the unit, and then the TV. Then, check
that the power is synchronized.

n

The power does not turn off

l

The internal microcomputer has frozen, due to an external electric shock (such
as lightning or excessive static electricity) or to a drop in the power supply
voltage.

  Hold down 

z

 (power) on the front panel for more than 15 seconds to reboot the

unit. If the problem persists, disconnect the power cable from the AC wall outlet
and plug it again.

 

 

En

156

Summary of Contents for AVENTAGE RX-A880












































































































































































































Reviews:

No comments

Related manuals for AVENTAGE RX-A880

National Criterion Instruction Book preview
Criterion
Brand: National Pages: 14
Jensen VR209 Installation And Operation Manual preview
VR209
Brand: Jensen Pages: 18
IDT WP3W-RK Manual preview
WP3W-RK
Brand: IDT Pages: 25
HobbyKing D58-4 Quick Start Manual preview
D58-4
Brand: HobbyKing Pages: 2
Rockville RGHR-ZA Owner'S Manual preview
RGHR-ZA
Brand: Rockville Pages: 16
A-Neuvideo ANI-HDR-200 Instruction Manual preview
ANI-HDR-200
Brand: A-Neuvideo Pages: 11
Trillium REC/ANN-ADPT-A User Manual preview
REC/ANN-ADPT-A
Brand: Trillium Pages: 2
Uni-Art Precise bh500 User Manual preview
bh500
Brand: Uni-Art Precise Pages: 8
Morer WIB2D User Manual preview
WIB2D
Brand: Morer Pages: 15
Botech BT-100 HD User Manual preview
BT-100 HD
Brand: Botech Pages: 48
Strategic Victa 2.4 GHZ WIRELESS VIDEO SENDER WITH IR EXTENDER Instruction Manual preview
2.4 GHZ WIRELESS VIDEO SENDER WITH IR EXTENDER
Brand: Strategic Victa Pages: 17
Teac CR-K1 Service Manual preview
CR-K1
Brand: Teac Pages: 16
Key Digital KD-VACRX Specifications preview
KD-VACRX
Brand: Key Digital Pages: 1
SoundMax SM-CCR3033 Instruction Manual preview
SM-CCR3033
Brand: SoundMax Pages: 28
SoundMax SM- MSD11 Instruction Manual preview
SM- MSD11
Brand: SoundMax Pages: 43
FAAC XT 433 SLH LR Quick Start Manual preview
XT 433 SLH LR
Brand: FAAC Pages: 2
H&B HF-275 Operating Instructions Manual preview
HF-275
Brand: H&B Pages: 9
Altronix eBridge PLUS eBridge8PCRM Installation Manual preview
eBridge PLUS eBridge8PCRM
Brand: Altronix Pages: 8

Brands by name

Popular brands

Load more brands