Yamaha AVENTAGE RX-A880 Owner'S Manual Download

Page: 100 / 203

Enabling the video signal processing

Enables/disables the video signal processing (resolution and aspect ratio) settings

configured in “Resolution” and “Aspect” in the “Setup” menu. For details, see the

following:

• “Setting a resolution to output HDMI video signals” (p.129)
• “Setting an aspect ratio to output HDMI video signals” (p.130)

Option menu

“Video Processing” > “Video Mode”

Settings

Direct

Disables the video signal processing.

Processing

Enables the video signal processing.

Selecting a video source to be output with the

selected audio source

Selects a video source to be output together with the selected audio source. For
example, you can watch the video from a different source while listening to the radio.

Option menu

“Video Out” > “Video Out”

Input sources

AUX, AUDIO 1-5, PHONO, TUNER, (network sources), AirPlay, MusicCast Link,
SERVER, NET RADIO, Bluetooth, USB

Settings

Off

Does not output video.

HDMI 1-7, AV 1-2

Outputs video input through the corresponding video input jacks.

Configuring the shuffle/repeat setting

Configuring the shuffle setting

Configure the shuffle setting for playback.

Option menu

“Shuffle / Repeat” > “Shuffle”

Settings

Off

Turns off the shuffle function.

Plays back songs in the current album (folder) in random order.

NOTE

This setting is available only when “USB” or “SERVER” is selected as the input source.

Configuring the repeat setting

Configure the repeat setting for playback.

Option menu

“Shuffle / Repeat” > “Repeat”

Settings

Off

Turns off the repeat function.

One

Plays back the current song repeatedly.

All

Plays back all songs in the current album (folder) repeatedly.

NOTE

This setting is available only when “USB” or “SERVER” is selected as the input source.

100

Summary of Contents for AVENTAGE RX-A880












































































































































































































Search results

Summary of Contents for AVENTAGE RX-A880

Reviews:

Related manuals for AVENTAGE RX-A880

Brands by name

Popular brands

Yamaha AVENTAGE RX-A880, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A880

Reviews:

Related manuals for AVENTAGE RX-A880

Brands by name

Popular brands