En
17
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
If you use five speakers in the front side, use two of them as front surround speakers (*1) or presence speakers (*2). We recommend using them as front surround speakers for
enjoying unprocessed playback (p.59) or presence speakers for enjoying stereoscopic sound fields (p.56).
• For information on the ideal speaker layout, see “Ideal speaker layout” (p.133).
• If you have seven speakers, use two of them as surround back speakers or presence speakers.
To reinforce the rear left/right sounds, use them as surround back speakers.
To create a natural 3-dimensional sound field, use them as presence speakers.
• Two subwoofers connected to the unit output the same sounds.
1
Placing speakers
Caution
• Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6
MIN”. In this case, you can also use 4-ohm speakers as the front speakers.
For details, see “Setting the speaker impedance” (p.20).
Speaker type
Abbr.
Function
Speaker system (the number of channels)
7.1+2
7.1
7.1
6.1
5.1
Front
5.1
4.1
3.1
2.1
Front (L)
1
Produce front left/right channel sounds (stereo sounds).
●
●
●
●
●
●
●
●
●
Front (R)
2
●
●
●
●
●
●
●
●
●
Center
3
Produces center channel sounds (such as movie dialogue and vocals).
●
●
●
●
●
●
●
Surround (L)
4
Produce surround left/right channel sounds. Surround speakers also produce surround back channel
sounds when no surround back speakers are connected.
●
●
●
●
●
*
1
●
Surround (R)
5
●
●
●
●
●
*
1
●
Surround back (L)
6
Produce surround back left/right channel sounds.
●
●
Surround back (R)
7
●
●
Surround back
8
Produces sounds mixed from surround back left/right channel sounds.
●
Presence (L)
E
Produce CINEMA DSP effect sounds. In combination with CINEMA DSP 3D (p.56), the presence speakers
create a natural 3-dimensional sound field in your room.
●
●
*
2
Presence (R)
R
●
●
*
2
Subwoofer
9
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
This channel is counted as “0.1”. You can connect 2 subwoofers (with built-in amplifier) to the unit.
●
●
●
●
●
●
●
●
●
1 2 3 4 5 6 7 8 9 10 11
