Yamaha AVENTAGE RX-A6ABL User Manual Download Page 122

Page: 122 / 443

Connect the YPAO microphone to the YPAO jack.

The unit (front)

Ear height

Select “Multi Measure” under “Measuring option”.

According to the guidance displayed on the screen, start the measurement.

The following screen appears on the TV when the measurement at the first position finishes.

Move the YPAO microphone to the next listening position and press ENTER.

Repeat it until measurements at all listening positions (up to 8) have been taken.

122

PREPARATIONS > Configuring the speaker settings

Summary of Contents for AVENTAGE RX-A6ABL




























































































































































































































































































































































































































































Search results

Summary of Contents for AVENTAGE RX-A6ABL

Reviews:

Related manuals for AVENTAGE RX-A6ABL

Brands by name

Popular brands

Yamaha AVENTAGE RX-A6ABL, User Manual

Search results

Summary of Contents for AVENTAGE RX-A6ABL

Reviews:

Related manuals for AVENTAGE RX-A6ABL

Brands by name

Popular brands