Setting the use of surround back speakers and their
size
Selects the setting according to the use and size of your surround back speakers
when “Power Amp Assign” in the “Setup” menu is set to “Sur.Back”.
Setup menu
“Speaker” > “Configuration” > “Surround Back”
NOTE
For details on “Power Amp Assign” in the “Setup” menu, see the following:
▪ “Setting your speaker system” (p.94)
Settings
Small
Select this option for small speakers.
The subwoofer or front speakers will produce surround back channel low-
frequency components (configurable in “Crossover”).
Large
Select this option for large speakers.
The surround back speakers will produce all of the surround back channel
frequency components.
None
Select this option when no surround back speakers are connected.
The surround speakers and subwoofer (or front speakers) will produce
surround back channel audio.
NOTE
▪ When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your
speaker is 16 cm (6.1/4”) or larger, or “Small” if it is smaller than 16 cm (6.1/4”).
▪ When using surround back speakers, be sure to connect the surround back left and right speakers. Using
only one surround back speaker was discontinued.
▪ “Surround Back” is not available when “Virtual CINEMA FRONT” is set to “On”. For details on “Virtual
CINEMA FRONT” in the “Setup” menu, see the following:
– “Setting the use of Virtual CINEMA FRONT” (p.98)
Setting the use of presence speakers and their size
Selects the setting according to the use and size of your presence speakers when
“Power Amp Assign” in the “Setup” menu is set to “Presence”.
Setup menu
“Speaker” > “Configuration” > “Presence”
NOTE
For details on “Power Amp Assign” in the “Setup” menu, see the following:
▪ “Setting your speaker system” (p.94)
Settings
Small
Select this option for small speakers.
The subwoofer or front speakers will produce presence channel low-
frequency components (configurable in “Crossover”).
Large
Select this option for large speakers.
The presence speakers will produce all of the presence channel
frequency components.
None
Select this option when no presence speakers are connected.
The front speakers will produce presence channel audio.
NOTE
When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your
speaker is 16 cm (6.1/4”) or larger, or “Small” if it is smaller than 16 cm (6.1/4”).
En
96
