Configuring the speaker settings
Setting your speaker system
Select the setting according to the speakers that are connected.
Setup menu
“Speaker” > “Configuration” > “Power Amp Assign”
Settings
Presence
Select this option when you use presence speakers in the 5.1.2 system.
Sur.Back
Select this option when you use a normal speaker system (not using the
presence speakers, Zone B speakers or bi-amp connections).
BI-AMP
Select this option when you connect front speakers that support bi-amp
connections.
Zone B
Select this option when you use Zone B speakers in addition to the
speaker system in the main zone (Zone A).
5.1ch
Select this option when you don't use the SURROUND BACK/
PRESENCE/BI-AMP/ZONE B terminals.
NOTE
For details on the speaker system, see the following:
▪ “Speaker systems and speakers to be connected” (p.17)
▪ “Connecting front speakers that support bi-amp connections” (p.25)
▪ “Playing back music in multiple rooms” (p.45)
Setting the use of a subwoofer
Selects the setting according to the use of your subwoofer.
Setup menu
“Speaker” > “Configuration” > “Subwoofer”
Settings
Use
Select this option when a subwoofer is connected.
The subwoofer will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
None
Select this option when no subwoofer is connected.
The front speakers will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
Setting the size of the front speakers
Selects the setting according to the size of your front speakers.
Setup menu
“Speaker” > “Configuration” > “Front”
Settings
Small
Select this option for small speakers.
The subwoofer will produce front channel low-frequency components
(configurable in “Crossover”).
Large
Select this option for large speakers.
The front speakers will produce all of the front channel frequency
components.
NOTE
▪ When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your
speaker is 16 cm (6
‑
1/4”) or larger, or “Small” if it is smaller than 16 cm (6
‑
1/4”).
▪ “Front” is automatically set to “Large” when “Subwoofer” is set to “None”. For details on “Subwoofer” in the
“Setup” menu, see the following:
– “Setting the use of a subwoofer” (p.94)
En
94
