Yamaha AVENTAGE RX-A680 Owner'S Manual Download

Page: 37 / 164

Error messages from YPAO

If any error message is displayed during the measurement, resolve the problem and

perform YPAO again.

Error message

TV screen

ENHANCER

LINK

ECO

MASTER

OUT

-R

YPAO VOL. A - DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B

2 A

FPR

SBL

SBR

FPL

MUTE VIRTUAL

E-5:NOISY

VOL.

E-9:CANCEL

Front display

Error message

Cause

Remedy

E-1:No Front SP
(E-1:NO FRNT SP)

Front speakers are not

detected.

Exit YPAO, turn off the unit, and then
check the speaker connections.

E-2:No Sur. SP
(E-2:NO SUR SP)

One of the surround

speakers cannot be
detected.

E-3:No F.PRNS SP
(E-3:NO FPR SP)

One of the presence

speakers cannot be
detected.

E-4:No Sur. Back SP
(E-4:NO SUR BACK SP)

One of the surround back

speaker cannot be

detected.

E-5:Noisy
(E-5:NOISY)

The noise is too loud.

Keep the room quiet and retry YPAO. If
you select “PROCEED”, YPAO takes the

measurement again and ignores any
noise detected.

E-6:Check Sur.
(E-6:CHECK SUR)

Surround back speakers are
connected, but no surround
speakers are connected.

Surround speakers need to be
connected in order to use surround back
speakers. Exit YPAO, turn off the unit,
and then reconnect the speakers.

E-7:No MIC
(E-7:NO MIC)

The YPAO microphone has
been removed.

Connect the YPAO microphone to the
YPAO MIC jack firmly and retry YPAO.

E-8:No Signal
(E-8:NO SIGNAL)

The YPAO microphone
cannot detect test tones.

Connect the YPAO microphone to the
YPAO MIC jack firmly and retry YPAO. If

this error occurs repeatedly, contact the
nearest authorized Yamaha dealer or
service center.

E-9:User Cancel
(E-9:CANCEL)

The measurement has been
canceled.

Retry or exit YPAO as necessary.

E-10:Internal Err.
(E-10:INTERNAL)

An internal error has
occurred.

Exit YPAO, and turn off and on the unit. If
this error occurs repeatedly, contact the
nearest authorized Yamaha dealer or
service center.

NOTE

▪ Text in parentheses denotes indicators on the front display.
▪ To exit the YPAO measurement for resolving the problem, use the cursor keys to select “EXIT” and press

ENTER.

▪ For the error messages E-5 and E-9 only, you can proceed with the current YPAO measurement. Press

ENTER, and then use the cursor keys to select “PROCEED” and press ENTER.

▪ To retry the YPAO measurement from beginning, press ENTER, and then use the cursor keys to select

“RETRY” and press ENTER.

Summary of Contents for AVENTAGE RX-A680





































































































































































Search results

Summary of Contents for AVENTAGE RX-A680

Reviews:

Related manuals for AVENTAGE RX-A680

Brands by name

Popular brands

Yamaha AVENTAGE RX-A680, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A680

Reviews:

Related manuals for AVENTAGE RX-A680

Brands by name

Popular brands