Yamaha AVENTAGE RX-A3080 Owner'S Manual Download Page 51

Page: 51 / 189

Connecting a network cable or preparing the wireless antenna

Connect the unit to a router (access point) with a network cable, or prepare the wireless

antenna for establishing a wireless network connection.

You can enjoy Internet radio or music files stored on media servers, such as PCs and Network

Attached Storage (NAS), on the unit.

Connecting the network cable

Connect the unit to your router with a commercially-available STP network cable (CAT-5 or

higher straight cable).

• If you want to use a wired (network cable) connection when a wireless connection has been made, set “Network

Connection” (p.147) in the “Setup” menu to “Wired”.

• If you are using a router that supports DHCP, you do not need to configure any network settings for the unit, as

the network parameters (such as the IP address) will be assigned automatically to it. You only need to configure

the network settings if your router does not support DHCP or if you want to configure the network parameters

manually (p.147).

• You can check whether the network parameters (such as IP address) are properly assigned to the unit in

“Information” (p.136) in the “Network” menu.

• Some security software installed on your PC or the firewall settings of network devices (such as a router) may

block the access of the unit to the network devices or the Internet. In these cases, configure the security

software or firewall settings appropriately.

• Each server must be connected to the same subnet as the unit.

• To use the service via the Internet, broadband connection is strongly recommended.

Preparing the wireless antenna

If you want to establish a wireless network connection and Bluetooth connection, stand the

wireless antenna up straight.

For information on how to connect the unit to a network device wirelessly, see “Connecting to

a network device wirelessly” (p.67).

Do not apply excessive force on the antenna. Doing so may damage it.

AV 6

AV 7

OUT

REMOTE

AC IN

RS-232C

TRIGGER

OUT

12V

0.1A

MAX. TOTAL

NETWORK

HDMI OUT

(4 NET)

(8 SERVER)

(HDCP2.2)

(ZONE OUT)

LAN

WAN

Network Attached Storage

(NAS)

Internet

Modem

Router

Network cable

The unit (rear)

Mobile device

Summary of Contents for AVENTAGE RX-A3080






























































































































































































Search results

Summary of Contents for AVENTAGE RX-A3080

Reviews:

Related manuals for AVENTAGE RX-A3080

Brands by name

Popular brands

Yamaha AVENTAGE RX-A3080, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A3080

Reviews:

Related manuals for AVENTAGE RX-A3080

Brands by name

Popular brands