Yamaha AVENTAGE RX-A3080 Owner'S Manual Download Page 147

Page: 147 / 189

147

■

Network Connection

Selects the network connection method.

Settings

■

IP Address

Configures the network parameters (such as IP address).

DHCP

Select whether to use a DHCP server.

Settings

IP Address

Set the network parameters (such as IP address, Subnet Mask, and Default Gateway)

manually.

■

Manual network settings

Set “DHCP” to “Off”.

Use the cursor keys to select “IP Address” and press ENTER.

Use the cursor keys to select a parameter type and press ENTER.

Use the cursor keys to move the edit position and to select a value.

To confirm the setting, press ENTER.

To configure another network parameter, repeat steps 2 to 4.

To exit from the menu, press SETUP.

■

Network Standby

Selects whether the unit can be turned on from other network devices (network standby).

Settings

With an advanced energy saving design, this product achieves a low power consumption of not

more than two watts when in Network Standby mode.

Wired

Select this option when you want to connect the unit to a network with a
commercially-available network cable (p.51).

Wireless (Wi-Fi)

Select this option when you want to connect the unit to a network via the wireless
router (access point). For details on settings, see “Connecting the unit to a
wireless network” (p.68).

Off

Does not use a DHCP server. Configure the network parameters manually. For
details, see “Manual network settings”.

Uses a DHCP server to automatically obtain the unit’s network parameters (such
as IP address).

IP Address

Specifies an IP address.

Subnet Mask

Specifies a subnet mask.

Default Gateway

Specifies the IP address of the default gateway.

DNS Server (P)

Specifies the IP address of the primary DNS server.

DNS Server (S)

Specifies the IP address of the secondary DNS server.

Off

Disables the network standby function.

Enables the network standby function.

(The unit consumes more power than when “Off” is selected.)

Auto

Enables the network standby function.

(If “Network Connection” is set to “Wired”, the unit is set to the power saving
mode when the network cable is disconnected.)

Summary of Contents for AVENTAGE RX-A3080






























































































































































































Search results

Summary of Contents for AVENTAGE RX-A3080

Reviews:

Related manuals for AVENTAGE RX-A3080

Brands by name

Popular brands

Yamaha AVENTAGE RX-A3080, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A3080

Reviews:

Related manuals for AVENTAGE RX-A3080

Brands by name

Popular brands