En
156
Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press MAIN ZONE
z
.
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press MAIN ZONE
z
to set the unit to standby mode and turn it on
again.
The new settings take effect.
ADVANCED SETUP menu items
• Default settings are underlined.
Configuring the system settings
(ADVANCED SETUP menu)
MAIN ZONE
z
STRAIGHT
PROGRAM
Item
Function
Page
SPEAKER IMP.
Changes the speaker impedance setting.
REMOTE SENSOR
Turns on/off of the remote control sensor on the main unit.
REMOTE CON AMP
Selects the unit’s remote control ID.
TUNER FRQ STEP
(Asia and General models only)
Changes the FM/AM tuning frequency setting.
TV FORMAT
Switches the video signal type.
MONITOR CHECK
Removes the limitation on HDMI video output.
4K MODE
Selects the HDMI 4K (60 Hz/50 Hz) signal format.
RECOV./BACKUP
Creates backup of the settings of the unit, or recovers the settings
from the backup.
INITIALIZE
Restores the default settings.
FIRM UPDATE
Updates the firmware.
VERSION
Checks the version of firmware currently installed on the unit.