Yamaha Aventage RX-A2A User Manual Download

Page: 357 / 388

APPENDIX

Care and cleaning

Care for the front panel

The way of care for the front panel is as follows.

(

Wipe the front panel with a soft dry cloth. Do not wipe the surface hard.
Failure to observe this may cause damage to the surface.

(

Before you clean the front panel, be sure to turn off (standby) the power to the unit.

(

In standby mode, hold down SELECT/ENTER to disable the touch panel operation so that you can prevent
the unit from turning on carelessly.

357

APPENDIX > Care and cleaning

Summary of Contents for Aventage RX-A2A





































































































































































































































































































































































































Search results

Summary of Contents for Aventage RX-A2A

Reviews:

Related manuals for Aventage RX-A2A

Brands by name

Popular brands

Yamaha Aventage RX-A2A, User Manual

Search results

Summary of Contents for Aventage RX-A2A

Reviews:

Related manuals for Aventage RX-A2A

Brands by name

Popular brands