Yamaha AVENTAGE RX-A2080 Owner'S Manual Download Page 131

Page: 131 / 192

131

Speaker

Configures the speaker settings manually.

Default settings are underlined.

■

Setting Pattern

Registers two speaker setting patterns and switches between them.

When you configure the following speaker settings, the settings will be memorized in the

selected pattern.

• Measurement results (YPAO)

• Power Amp Assign

• Configuration

• Distance

• Level

• Parametric EQ

Settings

Pattern1, Pattern2

• The setting pattern currently selected is shown at the center of the diagram on the right side of the screen.

• This function is useful when you want to save certain settings according to the varying conditions of your

listening environment. For example, if you want to switch the settings when curtains are open or closed, you

can save the settings suited for each condition and switch between them.

■

Setting Data Copy

Copies the “Setting Pattern” parameters in the specified direction.

Choices

■

Power Amp Assign

Selects a speaker system.

The unit has 9 built-in amplifiers. You can connect 2 to 11 speakers and up to 2 subwoofers

(with built-in amplifier) to create the favorite acoustic space in your room. You can also apply

bi-amp connections, channel expansion (using an external power amplifier) or multi-zone

configurations to enhance your system.

Settings

Pattern1 ▶ 2

Copies the “Pattern1” parameters to “Pattern2”.

Pattern2 ▶ 1

Copies the “Pattern2” parameters to “Pattern1”.

Basic

Select this option when you use the basic speaker configuration (up to 9-channel
plus rear presence speakers) (p.21).

7.2 +1Zone

Select this option when you use Zone2 (or Zone3) speakers in addition to the 7.2
system in the main zone (p.32).

You can select a zone to be assigned to the EXTRA SP 1 jacks (default: Zone2).

7.2.2 +1Zone

Select this option when you use Zone2 (or Zone3) speakers in addition to the 7.2.2
system in the main zone (p.32).

You can select a zone to be assigned to the EXTRA SP 2 jacks (default: Zone2).

7.2 +2Zone

Select this option when you use Zone2 and Zone3 speakers in addition to the 7.2
system in the main zone (p.32).

You can select a zone to be assigned to the EXTRA SP 1 and EXTRA SP 2 jacks
(default: Zone2 for EXTRA SP 1, Zone3 for EXTRA SP 2).

7.2.4 [ext.RP]

(RX-A3080 only)

Select this option when you use the 7.2.4 system including rear presence channel
expansion using an external amplifier (p.33).

7.2.4 [ext.Front]

(RX-A3080 only)

Select this option when you use the 7.2.4 system including front channel
expansion using an external amplifier (p.34).

7.2.4 [ext.FP+RP]

(RX-A3080 only)

Select this option when you use the 7.2.4 system including front presence and
rear presence channel expansion using an external amplifier (p.34).

7.2.2 [ext.Front]
+1Zone

Select this option when you use Zone2 (or Zone3) speakers in addition to the 7.2.2
system (including front channel expansion using an external amplifier) in the
main zone (p.35).

You can select a zone to be assigned to the EXTRA SP 2 jacks (default: Zone2).

Summary of Contents for AVENTAGE RX-A2080

































































































































































































Search results

Summary of Contents for AVENTAGE RX-A2080

Reviews:

Related manuals for AVENTAGE RX-A2080

Brands by name

Popular brands

Yamaha AVENTAGE RX-A2080, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A2080

Reviews:

Related manuals for AVENTAGE RX-A2080

Brands by name

Popular brands