manualshive.com logo in svg

Yamaha AVENTAGE RX-A2050, Owner'S Manual

The Yamaha AVENTAGE RX-A2050 is a top-notch audio receiver designed to enhance your home entertainment experience. With its user-friendly features and robust performance, setting up this device is a breeze. Simply visit manualshive.com to instantly download the easy setup manual for free.

Share
Download
background image

En

177

HDMI and video information

Component video signal

With the component video signal system, the video signal is separated into the Y signal for luminance and 
the Pb and Pr signals for chrominance. Color can be reproduced more faithfully with this system because 
each of these signals is independent.

Composite video signal

With the composite video signal system, color, brightness, and synchronization data signals are combined 
and transmitted with a single cable.

Deep Color

Deep Color is a technology that HDMI specification supports. Deep Color increases the number of available 
colors within the boundaries defined by the RGB or YCbCr color space. Conventional color systems 
process the color using 8 bits. Deep Color processes the color with 10, 12, or 16 bits. This technology 
allows HDTVs and other displays to increase from millions of colors to billions of colors and eliminate 
on-screen color banding for smooth tonal transitions and subtle gradations between colors.

HDCP

HDCP (High-bandwidth Digital Content Protection) is a digital copy protection form that prevents copying of 
digital contents as it travels across connections (such as HDMI).

HDMI

HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/video 
signal transmission. This interface transmits both digital audio and digital video signals using a single cable 
without any loss. HDMI complies with HDCP (High-bandwidth Digital Content Protection) and provides a 
secure audio/video interface. For further information on HDMI, visit the HDMI website at 
“

http://www.hdmi.org/

”.

x.v.Color

“x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color space than 
sRGB and allows the expression of colors that were not hitherto possible. While remaining compatible with 
the color gamut of sRGB standards, “x.v.Color” expands the color space, and thus can produce more vivid, 
natural images.

Network information

SSID

SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point.

Wi-Fi

Wi-Fi (Wireless Fidelity) is a technology that allows an electronic device to exchange data or connect to the 
Internet wirelessly using radio waves. Wi-Fi offers the advantage of eliminating the complexity of making 
connections with network cables by using wireless connection. Only products that complete Wi-Fi Alliance 
interoperability tests can carry the “Wi-Fi Certified” trademark.

WPS

WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy 
establishment of a wireless home network.

Summary of Contents for AVENTAGE RX-A2050


































































































































































































Reviews:

No comments

Related manuals for AVENTAGE RX-A2050

Icom IC-F70DT Service Manual preview
IC-F70DT
Brand: Icom Pages: 42
Icom IC-F7010T Instructions Manual preview
IC-F7010T
Brand: Icom Pages: 6
Alpine CDA-9884R Owner'S Manual preview
CDA-9884R
Brand: Alpine Pages: 45
ADTRAN 1245001L6 Installation And Maintenance Manual preview
1245001L6
Brand: ADTRAN Pages: 24
Jackson Labs Micro-JLT GNSS User Manual preview
Micro-JLT GNSS
Brand: Jackson Labs Pages: 83
l-com LCTP-10BT-10B5 Installation Manual preview
LCTP-10BT-10B5
Brand: l-com Pages: 6
Boss Audio Systems BV9371BD User Manual preview
BV9371BD
Brand: Boss Audio Systems Pages: 23
AAS AAS-VPHP15-16K User Manual preview
AAS-VPHP15-16K
Brand: AAS Pages: 4
Zenith TELEVISION RECEIVER Operating Manual preview
TELEVISION RECEIVER
Brand: Zenith Pages: 8
Woxcon TPUH412RA User Manual preview
TPUH412RA
Brand: Woxcon Pages: 7
Boss Audio Systems 639UA User Manual preview
639UA
Brand: Boss Audio Systems Pages: 9
JBL PRV170 Owner'S Manual preview
PRV170
Brand: JBL Pages: 7
Ross HDT2-5101 User Manual preview
HDT2-5101
Brand: Ross Pages: 36
afx light 15-1824 Instruction Manual preview
15-1824
Brand: afx light Pages: 15
Aiwa NSX-A115 Operating Instructions Manual preview
NSX-A115
Brand: Aiwa Pages: 56
Icom IC-F4002 Instruction Manual preview
IC-F4002
Brand: Icom Pages: 48
iGage iG4 User Manual preview
iG4
Brand: iGage Pages: 57
Topfield TF4000Fe User Manual preview
TF4000Fe
Brand: Topfield Pages: 72

Brands by name

Popular brands

Load more brands