Yamaha AVENTAGE RX-A1060, Owner'S Manual

Page: 109 / 190

En
109
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Automatically optimizes the speaker settings (YPAO). 40
Manual Setup
Setting Pattern Registers two speaker setting patterns and switches between them. 112
Setting Data Copy Copies the “Setting Pattern” parameters in the specified direction. 112
Power Amp Assign Selects a speaker system. 112
Configuration
Front Selects the size of the front speakers. 113
Center Selects whether or not a center speaker is connected and its size. 113
Surround Selects whether or not surround speakers are connected and their size. 113
Surround Back Selects whether or not surround back speakers are connected and their size. 113
Front Presence Selects whether or not front presence speakers are connected and their size. 114
Subwoofer Selects whether or not a subwoofer is connected and its phase. 114
Layout Selects the layouts of the surround speakers and front presence speakers. 114
Distance Sets the distance between each speaker and listening position. 114
Level Adjusts the volume of each speaker. 115
Parametric EQ Adjusts the tone with an equalizer. 115
Test Tone Enables/disables the test tone output. 115
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 116
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 116
Adjustment Adjusts the delay between video and audio output manually. 116
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 116
Max Volume Sets the limit value of the volumes. 116
Initial Volume Sets the initial volume for when this receiver is turned on. 117
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 117
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level. 117
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 117
Virtual Surround Back Speaker Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. 117
Object Decode Mode Enables/disables playback of object-based audio signals such as Dolby Atmos contents. 117
Video Video Mode Enables/disables the video signal processing (resolution and aspect ratio). 118
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 119
Audio Output Selects a device to output audio. 119
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 120