N3X
Owner’s Manual
• 49
Assembling the Unit
When assembling the unit, consult a qualified AvantGrand dealer.
CAUTION
• Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble in accordance with
the sequence given below.
• Assembly should be carried out by at least three persons.
• Be sure to use the correct screw size, as indicated below. Use of incorrect screws can damage the instrument.
• Be sure to tighten all screws upon completing the assembly of each unit.
• To disassemble, reverse the assembly sequence given below.
1
Remove the parts and collect them
together for assembly.
1-1 Remove the parts shown below from the
smaller box.
1-2 Set the larger box upright with the right side
up.
1-3 Cut the bands.
1-4 Remove the covers.
Have a Phillips-head (+) screwdriver of the appropri-
ate size ready.
CAUTION
Do not lay the main unit upside down on the floor.
Incorrect
Legs
Bolts (17 pcs.)
Front
(L)
Rear
Front
(R)
Pedal
Screws (4 pcs.)
Pedal brace rods (2 pcs.)
Power cord
Cord holders (3 pcs.)
Wrench
(Used to tighten
bolts)
This side down