AV-S77
AV-S77
13
DIR2
CODEC.DA
CS4227
YM3436
CODEC.AD
AC3Dav(YSS918)
CS4227
DECODER
DOLBY DIGITAL
or
PRO LOGIC
256K SRAM
DSP
ANALOG IN
DIGITAL IN
LS/RS
LS/RS
C/LFE
C/LFE
L/R
L/R
REAR L
REAR R
CENTER
SUB WOOFER
MAIN R
MAIN L
DSP FULL BIT
The main L/R is input through AC3Dav to DSP and then output through all
channels. The same applies as “YSS918” except that the digital data is output in
full bit at D/A.
3. AC-3/dts Through
Only the signal of the digital system is input. The AC3 signal is decoded and reproduced according to
the input source.
The AC-3 signal in each channel is AC-3 decoded and output through AC3Dav. The
combined status information of the sampling frequency and the number of channels
of the AC3 signal appears on the Fl display.
Status information
AC3
48k
3/2
Sampling frequency
Number of channels
Sampling frequency (Display)
Analog
Analo
32kHz
32k
44.1kHz
44.1k
48kHz
48k
Number of channels
(Front/Rear)
(Display)
1+1
1+1
1/0
1/0
2/0
2/0
3/0
3/0
2/1
2/1
3/1
3/1
2/2
2/2
3/2 5.1ch
3/2
7.1 (DTS)
7.1
AUX IN
:
– 20dBV, Both ch
VOLUME
:
MAX
CN301 (Page 31, G3)
MAIN L (1kHz)
:
– 11dBV
MAIN R (1kHz)
:
– 11dBV
SUBWOOFER (30Hz) :
– 13dBV
REAR L (1kHz)
:
– 17dBV
REAR R (1kHz)
:
– 17dBV
CENTER (1kHz)
:
< – 45dBV
The shaded square means that the element included in it does not operate.