En
3
2
Preparing the remote
control
A Lithium battery (CR2025) has already been inserted into the remote
control. Pull out the insulation sheet as follows so as to use the
remote control.
Operating range of the remote control
The remote control can be used to control the functions of this
product. When using the remote control, point the remote control at
the remote control sensor of the sound bar within the range shown in
the following illustration:
3
Installing the product
Install the sound bar as shown in the following illustration.
Battery insulating strip
Within 6 m (20 ft)
Remote control sensor
Remote control
For proper installation of the sound
bar on a wall, make sure to have the
work done by a contractor with
qualified service personnel. See the
Wall Mounting Installation Guide on
our website for the installation
method.
Wall Mounting
Installation Guide
