Yamaha Artiste AR-80 Electone Owner'S Manual Download Page 121

Page: 121 / 180

115

After you have selected a Voice, the following display (or one similar) will appear:

Use the Menu buttons to select the desired Voice Edit page, and edit the
Voice according to the instructions that follow.

VOICE EDIT — NAME REP. OL (Name/Repeat/OL) Page

NAME

• INPUT NAME

This calls up the INPUT NAME pages for assigning an original name to the edited Voice. (For
details, see page 118.)

REPEAT

The Repeat function produces repeating notes, when you hold a key or chord on the
keyboard. There are two modes: All and Twin. (These modes only change the Repeat sound
when more than one note is held.) The repeat speed is adjustable.

•

MODE (OFF, ALL, TWIN)

OFF

Turns Repeat off.

ALL

Repeats all of the notes in a held chord.

TWIN

Alternately repeats the highest note with the lower notes in a held chord.

PAGE

AR-100E-10/Voice Edit* 8/22/97 11:32 AM ページ 115

Summary of Contents for Artiste AR-80 Electone





















































































































































































Search results

Summary of Contents for Artiste AR-80 Electone

Reviews:

Related manuals for Artiste AR-80 Electone

Brands by name

Popular brands

Yamaha Artiste AR-80 Electone, Owner'S Manual

Search results

Summary of Contents for Artiste AR-80 Electone

Reviews:

Related manuals for Artiste AR-80 Electone

Brands by name

Popular brands