manualshive.com logo in svg

Yamaha AR210 2020, Owner'S/Operator'S Manual

The Yamaha AR210 2020 is an exceptional watercraft designed for thrilling adventures on the waves. To ensure you maximize its full potential, make sure to get your hands on the comprehensive Owner's/Operator's manual. For hassle-free access, simply visit our website, where you can download the manual for free and embark on your next waterborne escapade with confidence.

Share
Download
background image

Instrument operation

68

Operation buttons

In addition to touching the multi-function dis-
play directly, you can use the operation but-
tons and the controller to operate various
functions.

Controller

Operating the boat at a steady speed 
(cruise assist)

The cruise assist feature is for steady engine
speed operation when the boat is traveling
above no-wake speeds. The cruise assist is
available for use whenever the engines are

running above 3000 rpm and below 7000
rpm.
To activate the cruise assist:
(1) Push the remote control levers forward

to open the throttle until the desired en-
gine speed is reached and both engines
are operating at the same engine speed.

(2) Push the “CRUISE/NO WAKE” (+) button

or “CRUISE/NO WAKE” (–) button. When
the cruise assist is activated, “Cruise”
and the cruise assist setting level will be
displayed under the boat speed.

1

Cruise assist setting level

Once the cruise assist is activated, the set
engine speed can be increased by pushing
the “CRUISE/NO WAKE” (+) button or de-
creased by pushing the “CRUISE/NO
WAKE” (–) button. However, the adjust-
ment is limited to a maximum of 8 incre-
ments above or below the initial cruise
assist setting. Each time a button is
pushed, the engine speed will increase or
decrease approximately 100–200 rpm.

While the cruise assist is activated, the en-
gine speed can also be adjusted by operat-
ing the remote control levers. 

To deactivate the cruise assist:
Operate the remote control levers to de-
crease the engine speed to 3000 rpm or less.

Name

Function

1

“HOME” button

Displays the home 
screen. (See page 74.)

2

“VOLUME  – 
(SCROLL)” but-
ton

Switches the joystick 
between the volume 
control mode and the 
navigation control 
mode. When the main 
switches are turned to 
the on position, the 
volume control mode 
is selected by default.

3

“CANCEL” but-
ton

Deselects the current-
ly selected item.

4

“CRUISE/NO 
WAKE” (–) but-
ton

Activate and set the 
cruise assist, no-wake 
mode, and reverse 
RPM control. (See the 
following sections.)

5

“CRUISE/NO 
WAKE” (+) but-
ton

CRUISE

CANCEL

HOME

NO WAKE

CRUISE

NO WAKE

VOLUME

(SCROLL)

2

1

3

5

4

N

NW

NE

SPEED

MPH

4

1

SportsBoat_F3R13.book  Page 68  Friday, May 31, 2019  9:42 AM

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for AR210 2020















































































































































































































Reviews:

No comments

Related manuals for AR210 2020

Jeanneau SUN FAST 32i Manual preview
SUN FAST 32i
Brand: Jeanneau Pages: 95
C&C Pendragon 27 Quick Start Manual preview
Pendragon 27
Brand: C&C Pages: 32
Yamaha WaveRunner GP800R Assembly Manual preview
WaveRunner GP800R
Brand: Yamaha Pages: 24
Yamaha XR1800Z Ower'S Manual preview
XR1800Z
Brand: Yamaha Pages: 110
Yamaha WaveRunner V1 2016 Owner'S/Operator'S Manual preview
WaveRunner V1 2016
Brand: Yamaha Pages: 104
Yamaha WaveRunner GP1800 2017 Owner'S/Operator'S Manual preview
WaveRunner GP1800 2017
Brand: Yamaha Pages: 106
Yamaha WaveRunner SUV SV1200X Owners/Operaators Manual preview
WaveRunner SUV SV1200X
Brand: Yamaha Pages: 125
Prestige 400 Owner'S Manual preview
400
Brand: Prestige Pages: 112
NW Explorations La Vida 2022 Operating Manual preview
La Vida 2022
Brand: NW Explorations Pages: 59
Jeanneau PRESTIGE 420S Owner'S Manual preview
PRESTIGE 420S
Brand: Jeanneau Pages: 100
Jeanneau PRESTIGE 32 Owner'S Manual preview
PRESTIGE 32
Brand: Jeanneau Pages: 96
Jeanneau SUN ODYSSEY 49 DS Owner'S Manual preview
SUN ODYSSEY 49 DS
Brand: Jeanneau Pages: 126
Ranger Fisherman Series Owner'S Manual preview
Fisherman Series
Brand: Ranger Pages: 77
Zodiac MilPro Grand Raid Series Owner'S Manual preview
MilPro Grand Raid Series
Brand: Zodiac Pages: 17
Cobalt Digital Inc 273 CUDDY CABIN Owner'S Manual preview
273 CUDDY CABIN
Brand: Cobalt Digital Inc Pages: 136
Jeanneau SUN ODYSSEY 469 Owner'S Manual preview
SUN ODYSSEY 469
Brand: Jeanneau Pages: 120
Flexboat FLEX 450 Assembly Instructions Manual preview
FLEX 450
Brand: Flexboat Pages: 8
Skeeter TZX190 Manual preview
TZX190
Brand: Skeeter Pages: 200

Brands by name

Popular brands

Load more brands