Yamaha AQUA CRUISE, User Manual

Page: 10 / 14

Using the AQUA CRUISE Care And Maintenance
15 16
When you buy the AQUA CRUISE the battery is
disconnected and needs to be charged. Follow the Battery
Instruction on pages 7 to 10 and charging instructions on
pages 11 to 14.
1. Make sure the rechargeable battery has been fully
charged.
2. Place the AQUA CRUISE in the water.
Disassembling and Storing the AQUA CRUISE
DO NOT leave the AQUA CRUISE in the water. Always
take the unit out of water when not in use.
1. Always rinse the AQUA CRUISE in fresh water and
allow it to dry before storage immediately after use.
2. Unclip the Steering Unit, remove the Steering Column
Sleeve, the Nozzle and Steering Column and unclip
the Steering Column.
Tip: If the Steering Column Sleeve is stuck, pour some
water over it to lubricate and then remove.
3. Open the Battery Door and remove the rechargeable
battery (see also section on Rechargeable Battery
Care for more storage information).
4. Deflate the inflatable fully. To do this insert one air
release tube (packed with the repair kit) in each valve
and press gently on the inflatable until all air has been
expelled.
5. Store the AQUA CRUISE in the original box in a dry
place - ambient temperature for storage should be
within - 20oC to 40oC (-4oF to 104oF).
3. Turn the Master Switch to 'ON' position (See Fig.14).
4. Help your child to sit on the AQUA CRUISE - a
Approved Personal Flotation Device / Approved
Life-Preserver should always be worn by your child.
5. The rider simply has to pull the Trigger to start, turn
the steering unit to maneuver and release the Trigger
to stop.
Fig.14
ON