background image

INSTRUMENT AND CONTROL FUNCTIONS

4-3

1

2

3

4

5

6

7

8

9

10

11

12

EAU12501

Horn switch “

Press this switch to sound the horn.

EAU12582

Light switch “

/ ”

Set the light switch to “

” to turn on the

headlight, taillight and meter lighting.
Set the switch to “ ” to turn off all the
lights.

EAU12661

Engine stop switch “

/

Set this switch to “

” before starting

the engine. Set this switch to “

” to

stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.

EAU12713

Start switch “

” 

Push this switch to crank the engine
with the starter. See page 6-1 for start-
ing instructions prior to starting the en-
gine.

EAU35001

Clutch lever

The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the start-
ing circuit cut-off system. (See
page 4-11.)

A clutch lever lock is provided to keep
the clutch disengaged. To lock the
clutch lever, push down the clutch lever
lock while holding the clutch lever
pulled towards the handlebar grip. To
release the lever lock, simply pull the
clutch lever.

1. Clutch lever

1

1. Clutch lever lock

1

U53C23E0.book  3 ページ  2014年1月22日 水曜日 午後2時7分

Summary of Contents for AG200FEE 2014





















































































Reviews: