Yamaha AG100FA Owner'S Manual Download Page 17

Page: 17 / 78

4-1

INSTRUMENT AND CONTROL FUNCTIONS

EAU10450

Main switch

The main switch controls the ignition
and lighting systems. The various main
switch positions are described below.

EAU10630

All electrical systems are supplied with
power, and the engine can be started.
The key cannot be removed.

EAU45751

OFF

All electrical systems are off. The key
can be removed.

WARNING

EWA10072

Never turn the key to “OFF” while
the vehicle is moving, otherwise the

electrical systems will be switched
off, which may result in loss of con-
trol or an accident.

EAU10981

Indicator lights

EAU11070

Neutral indicator light “NEUTRAL”

This indicator light comes on when the
transmission is in the neutral position.

OFF

1. Neutral indicator light “NEUTRAL”

3HA-9-25.book 1 ページ２０１０年１１月１０日　水曜日　午前９時４８分

Summary of Contents for AG100FA















































































Search results

Summary of Contents for AG100FA

Reviews:

Related manuals for AG100FA

Brands by name

Popular brands

Yamaha AG100FA, Owner'S Manual

Search results

Summary of Contents for AG100FA

Reviews:

Related manuals for AG100FA

Brands by name

Popular brands