Yamaha AEROX YQ50 Owner'S Manual Download

Page: 26 / 84

INSTRUMENT AND CONTROL FUNCTIONS

ZAUM0204

ZAUM0263

1. Storage compartment B
2. Oil tank cap

3-8

EAU03750

2-stroke engine oil

Make sure that there is sufficient oil in
the 2-stroke engine oil tank. Add the
recommended 2-stroke engine oil if
necessary.

NOTE :
Make sure that the 2-stroke engine oil
tank cap is properly installed.

Recommended oil:

Yamalube 2
or equivalent 2-stroke engine oil
(JASO grade "FC", or ISO
grades "EG-C" or "EG-D")

Oil quantity:

1.3 L

EAUM0082

2-stroke engine oil tank cap

The  2-stroke  engine  oil  tank  cap  is
located  in  the  storage  compartment.
(See  page  3-11  for  storage
compartment  opening  and  closing
procedures.)

1. To remove the 2-stroke engine oil

tank cap, pull it off.

2. To install the 2-stroke engine oil

tank cap, push it into the oil tank
opening.

NOTE :
Make sure that the 2-stroke engine oil
tank cap is properly installed before
riding the scooter.

Ofrecido por www.electromanuales.com

Summary of Contents for AEROX YQ50





















































































Search results

Summary of Contents for AEROX YQ50

Reviews:

Related manuals for AEROX YQ50

Brands by name

Popular brands

Yamaha AEROX YQ50, Owner'S Manual

Search results

Summary of Contents for AEROX YQ50

Reviews:

Related manuals for AEROX YQ50

Brands by name

Popular brands