Changes in PLAY MODE
17
Chapter 2
Chapter 2 Upgrade Reference
PLAY - COMMAND Key -
COPY
☞
102
• You can now use Knob 3 to select the items to be copied. You can choose to copy all
parameters (
AllParam
), sample assignments and easy-edit data only (
Merge
), or ef-
fects settings for any one of the effect blocks (
Effect1
,
Effect2
, or
Effect3
). Note that
the
AllParam
copy overwrites all content of the destination. If you select
Merge
, the
A3000 includes all sample and sample banks from the source program into the desti-
nation program (by switching the
ToPgm
settings to
on
), and copies the easy-edit
settings related to these samples and banks.
• Knob 2 selects the program to be copied (you can no longer use Knob 3 for this
purpose), and Knob 4 selects the destination program (you can no longer use Knob 5
for this). If you are copying the settings for an effect block, you use Knob 5 to select
the destination block for these settings.
• If you wish, you can use this function to copy the effect data from one block into
another block of the same program: simply select the same program as both source
and destination, and set different values for the source and destination effects.
PLAY - COMMAND Key -
SETINIT
☞
104
The
EFFECT
,
SETUP
, and
CONTROL
parameters can each be set to
off
,
current
, or
factory
(where Version 1 offered
off
and
on
).
If you select
current
, the A3000 registers the current values as the program’s defaults.
(This is equivalent to Version 1’s
on
setting.) If you select
factory
, the A3000 registers
the factory defaults as the program’s defaults.
