Edit
MONTAGE Reference Manual
84
Reference
Motion Seq Step Type (Lane Motion Sequencer Step Type)
Determines each Step Type of the Motion Sequence. You can switch between the Step Types A and B for
the Step 1 – 8 or 9 – 16 by the SCENE [1] – [8] buttons depending on the cursor position on the display.
Settings:
A, B
Pulse A / Pulse B (Lane Motion Sequencer Step Curve Type)
Determines the Curve Type of the parameter for each of “Pulse A” and “Pulse B.” “Motion Seq Step Type”
described above determines which curve set here is used for each step.
Settings:
For Preset Bank: Standard, Sigmoid, Threshold, Bell, Dogleg, FM, AM, M, Discrete Saw, Smooth Saw, Triangle,
Square, Trapezoid, Tilt Sine, Bounce, Resonance, Sequence, Hold
For details, see the Synthesizer Parameter Manual PDF document.
For User Bank: User 1 – 32
When a Library file is read: Curves in Library 1 – 8
Direction (Lance Motion Sequencer Step Curve Direction)
Determines the Direction of the Step Curve for the Motion Sequence.
Settings:
Forward, Reverse
Prm1/Prm2 (Lane Motion Sequencer Step Curve Parameter)
Adjusts the shape of the Step Curve for the Motion Sequence.
This parameter is not available depending on the Curve Type. Also the range of available parameter
values differs depending on the Curve Type.
Control (Lane Motion Sequencer Step Curve Shape Control Switch)
Determines whether or not to control the shape of the Step Curve for the Motion Sequence by operating
Knobs. This parameter is displayed only when “MS FX” is set to on. Also this parameter is not available
depending on the Curve Type.
Settings:
Off, On
Store Sequence
Stores the edited Sequence data. For details about storing data, see “Store/Save” (
).
