MONTAGE Reference Manual
49
Reference
Scene
You can store all parameter settings such as Arpeggio type, Motion Sequencer type, and the Part
parameter values together as a “Scene.” There are eight Scenes and you can select them by pressing the
[SCENE] button. From the Scene display you can edit parameters related to the Scene function.
When [Memory] is turned on for the function, the Motion Sequencer type, or the Arpeggio type, the
corresponding function information is automatically memorized to the currently selected [SCENE] button.
For details about the Scene function, see the Owner’s Manual.
NOTE
You can also change Scene Settings from any other operation displays. To do this, set the parameter value
available for the Scene by operating the corresponding knob/slider, and press one of the SCENE [1] – [8]
buttons while holding down the [SHIFT] button. Scenes 1 to 8 are assigned to each button.
Scene Select
Switches Scenes by selecting tabs. This setting is applied to the SCENE [1] – [8] buttons on the panel.
Settings:
1 – 8
Memory (Memorize Switch)
Determines whether or not to memorize each parameter (such as Arpeggio, Motion Sequencer, Super
Knob, Mixing, Amplitude EG, and Arp/MS FX) as a Scene. When this is off, the parameter is not displayed
even when the corresponding tab is selected.
Settings:
Off, On
When the “Arp/Motion Seq” tab is selected and both Memorize Switches for “Arp” and
“Motion Seq” are set to ON
Motion Seq Master (Motion Sequencer Master Switch)
Determines whether Motion Sequencer is set to ON or OFF for the entire Performance in the selected
Scene.
Settings:
Off, On
Motion Seq Select (Motion Sequence Select)
Determines the Motion Sequence type for the selected Scene.
Settings:
1 – 8
Arp Master (Arpeggio Master Switch)
Determines whether Arpeggio is set to ON or OFF for the entire Performance in the selected Scene.
Settings:
Off, On
Scene
Operation
[PERFORMANCE]
[Scene]
