Yamaha 8 Reference Manual Download

Page: 164 / 187

MONTAGE Reference Manual

Search

Performance Category

Arp Category

Waveform

164

Reference

Waveform Category Search (Waveform Search)

From the Waveform Category Search display you can search and select the Waveforms.

Bank (Waveform Bank Select)

Filters the Waveform List by Bank.

Settings:

All, Preset, User, Library Name (when the Library file is read)

Name Search (Waveform Name Search)

Searches for a Waveform by inputting a part of the Waveform Name.

Settings:

See the Data List PDF document.

Main (Waveform Category)

Settings:

See the Data List PDF document.

Sub (Waveform Sub Category)

Settings:

See the Data List PDF document.

Sort (Sort Order)

Determines the Sort Order of the Waveform List.

Settings:

Default, Name, Date

Name:

Sorts by name. When the lower arrow is displayed, the List is arranged in ascending order (A to Z). When the

upper arrow is displayed, the List is arranged in descending order.

Date:

Sorts in order of storing. When the lower arrow is displayed, the List is arranged in descending order (newer to

older). When the upper arrow is displayed, the List is arranged in ascending order.

Operation

Waveform related display



Part selection



Waveform selection



[CATEGORY]

Name Search

Waveform list

Summary of Contents for 8




























































































































































































Search results

Summary of Contents for 8

Reviews:

Related manuals for 8

Brands by name

Popular brands

Yamaha 8, Reference Manual

Search results

Summary of Contents for 8

Reviews:

Related manuals for 8

Brands by name

Popular brands