10
Adjusting the trim level to zero
1. Fully tilt the outboard motor down.
2. Press the [MENU] button in the main
screen to display the “MENU” screen.
3. Use the directional keypad and the [SET]
button to select “Trim Level” in the
“MENU” screen. The “TRIM LEVEL”
screen is displayed.
4. Check that the displayed trim level is
“0%”.
5. If a value other than “0%” is displayed,
press the [SET] button to reset the set-
ting.
Initial Setting
00_6YC_owners_En.book Page 10 Sunday, March 1, 2015 3:36 PM
