30
En
FM/AM tuning
During the automatic station preset, the upper area of
the screen changes as follows: READY
→
SEARCH
→
MEMORY each time a station is registered.
When registration is complete, “FINISH” appears
and the option menu screen automatically reappears.
When you press
n
OPTION
on the remote control,
the screen returns to the original state.
You can manually register AM stations or FM stations
with weak signals.
1
Tune in to a station referring to “Tuning in to
the desired FM/AM station (Frequency
tuning)” (see page 29).
2
Press
F
MEMORY
(or
i
MEMORY
).
“Manual Preset” appears on the front panel display,
followed soon by the preset number to which the
station will be registered.
y
•
By pressing down
F
MEMORY
(or
i
MEMORY
) for more
than 2 seconds, you can skip step 3 and register the preset number
to be one higher than the last preset number.
3
Press
G
PRESET
l
/
h
(or
i
PRESET
k
/
n
)
on the remote control to select the preset
number to which the station will be
registered.
When you select a preset number to which no station
is registered, “Empty” appears on the display. When
you select a registered preset number, a registered
frequency is displayed on the right of the preset
number.
y
•
You can select a preset number using the
t
Numeric keys
.
4
Press
F
MEMORY
(or
i
MEMORY
) again to
register.
When registration is complete, the screen returns to
the original state.
y
•
To cancel registration, press
o
RETURN
on the remote control
or leave the tuner without any operations for about 30 seconds.
You can call preset stations registered by automatic station
preset or manual station preset.
Press
G
PRESET
l
/
h
(or
i
PRESET
k
/
n
) to
select a preset number.
y
•
Preset numbers to which no stations are registered will be skipped.
•
When “No Presets” or “No Presets in Memory” is displayed it means that
no stations are registered. See page 29 and register stations.
•
You can directly select a preset number by pressing a
t
Numeric
keys
while calling a preset station. “Empty” appears on the display if
you enter a preset number to which no station is registered. “Wrong
Num.” appears if you enter an invalid number.
•
When you press
t
Numeric keys
during normal tuning, a preset
number is selected. Set tuning mode to preset tuning mode using
G
PRESET
l
/
h
(or
i
PRESET
k
/
n
) prior to the operation.
1
Press
O
INPUT
l
/
h
repeatedly (or press
h
TUNER
) to switch the input source to
“TUNER.”
2
Press
n
OPTION
on the remote control.
The option menu screen for setting options of tuner
input appears on the front panel display.
3
Display “Clear Preset” using the
o
Cursor
k
/
n
and press
o
ENTER
.
The following screen appears on the display.
y
•
You can cancel the operation and return to the option menu screen
by pressing
o
RETURN
on the remote control.
4
Select the preset number of the registered
station you want to clear using the
o
Cursor
k
/
n
and press
o
ENTER
.
The preset station registered to the selected preset
number is cleared. To clear the registration of
multiple preset numbers, repeat the above steps.
To end the operation, press
n
OPTION
.
Registering stations by manual station
preset
01:FM87.5MHz
Preset number
Frequency
Status
01:Empty
Flashing
New registered frequency
Empty (or frequency that is currently
registered to the preset number)
Preset
number
Calling a preset station (Preset tuning)
Clearing the preset station
01:FM92.5MHz
Preset number of the registered station you want to clear.
