82
ANTI-LOCK BRAKE SYSTEM (ABS)
CHAS
CAUTION:
NOTE:
[D-6-4] DELETING THE MALFUNCTION CODE
1. Connect the test coupler adapter 1 to the test
connector 2 . Refer to [B-5].
2. Turn the main switch on.
Previously recorded malfunction code is dis-
played by the ABS warning light.
3. Turn the engine stop switch 1 off.
If the starter switch is pushed without turning
the engine stop switch off, it may damage the
starting motor gears or other parts, therefore
be sure to turn it off.
4. Push the starter switch 2 more than 10 times
in 4 seconds, applying the front or rear brake
lever.
ABS warning light goes on when the starter switch
is pushed, but this state is normal.
5. Check that the ABS warning light keeps flash-
ing.
6. Turn the main switch off.
