background image

General information

4

EMU25171

Identification numbers record

EMU25183

Outboard motor serial number

The outboard motor serial number is stamped
on the label attached to the port side of the
clamp bracket.
Record your outboard motor serial number in
the spaces provided to assist you in ordering
spare parts from your Yamaha dealer or for
reference in case your outboard motor is sto-
len.

EMU37290

EC Declaration of Conformity 

(DoC)

This outboard motor conforms to certain por-
tions of the European Parliament directive re-
lating to machinery.
Each conformed outboard motor accompa-
nied with EC DoC.EC DoC contains the fol-
lowing information;

Name of Engine Manufacture

Model name

Product code of model (Approved model
code)

Code of conformed directives

EMU25203

CE Marking

Outboard motors affixed with this “CE”mark-
ing conform with the directives of; 98/37/EC,
94/25/EC - 2003/44/EC and 2004/108/EC.

EMU25213

C-Tick label

Engines affixed with this label conform to cer-
tain portion(s) of the Australian Radio Com-
munications Act.

1. Outboard motor serial number location

1. CE marking location

ZMU06040

U6E028E0.book  Page 4  Tuesday, February 10, 2009  3:19 PM

Summary of Contents for 5C



































































Reviews: