manualshive.com logo in svg

Yamaha 4X4 BIG BEAR YFM40FC, Owner'S Manual

Share
Download
Yamaha 4X4 BIG BEAR YFM40FC Owner'S Manual Download Page 52

5-8

EBU00493

Final gear oil
Make sure the final gear oil is at the specified
level. Add oil as necessary. (See pages 8-9 ~
8-10 for details.)

If desired, an SAE 80W90 hypoid gear oil may
be used for all conditions.

NOTE:
GL-4 is a quality and additive rating, GL-5 or
GL-6 rated hypoid gear oils may also be used.

EBU00678

Differential gear oil
Make sure the differential gear oil is at the
specified level. Add oil as necessary. (See
pages 8-11 ~ 8-12 for details.)

EBU00151

Throttle lever
Check to see that the throttle lever operates
correctly. It must open smoothly and spring
back to idle position when released. Repair as
necessary for proper operation.

EBU00152

Fittings and Fasteners
Always check the tightness of chassis fittings
and fasteners before a ride. Take the machine
to a Yamaha dealer or refer to the Service
Manual for correct tightening torque.

Recommended oil:

SAE 80 API GL-4 Hypoid gear oil

Recommended oil:
SAE 80 API GL-4 Hypoid gear oil

EE.book  Page 8  Tuesday, April 24, 2001  9:31 AM

Summary of Contents for 4X4 BIG BEAR YFM40FC









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands