manualshive.com logo in svg

Yamaha 485RDS, Owner'S Manual

The Yamaha 485RDS is a top-of-the-line audio receiver, delivering superior sound quality and advanced features. Ensure you make the most of this cutting-edge device by referring to the comprehensive Owner's Manual available for free download from our website. Discover seamless connectivity and immerse yourself in an unparalleled audio experience.

Share
Download
background image

24

SPECIFICATIONS

AUDIO SECTION

Minimum RMS Output Power per Channel

8 ohms, 20 Hz to 20 kHz, 0.04% THD

<

RX-485 RDS

>

............................65W+65W

<

RX-385/385 RDS

>

[U.S.A. and Canada models].......45W+45W
[Australia, U.K., Europe and 
General models]..........................40W+40W

6 ohms, 20 Hz to 20 kHz, 0.06% THD

<

RX-485 RDS

>

............................70W+70W

<

RX-385/385 RDS

>

[U.S.A. and Canada models].......48W+48W

Dynamic Power per Channel
(by IHF Dynamic Headroom measuring

method) 

<

RX-485 RDS

>

8/6/4/2 ohms ....................95/115/135/150W

<

RX-385/385 RDS

>

[U.S.A., Canada and General models]
8/6/4/2 ohms ..........................69/78/90/98W
[Australia, Europe and U.K. models]
8/6/4/2 ohms ..........................68/75/85/95W

DIN Standard Output Power per Channel

4 ohms, 1 kHz, 0.7% THD

[Europe model only] 

<

RX-485 RDS

>

......................................85W

<

RX-385/385 RDS

>

...............................55W

IEC Power 

<

RX-485 RDS

>

8 ohms, 1 kHz, 0.04% THD

[Europe model only]..............................75W

<

RX-385/385 RDS

>

8 ohms, 1 kHz, 0.04% THD

[Europe model only]..............................50W 

Damping Factor

8 ohms, 20 Hz to 20 kHz ............................80

Input Sensitivity/Impedance

PHONO MM ......................2.5 mV/47 k-ohms
CD/TAPE/AUX ..................150 mV/47 k-ohms

Maximum Input Signal (1 kHz, 0.01% THD) 

PHONO MM .........................................80 mV

Headphone Jack Rated Output/Impedance

8 ohms, 20 Hz to 20 kHz, 0.04% THD
Output Level

<

RX-485 RDS

>

....................................0.46V

<

RX-385/385 RDS

>

.............................0.45V

Impedance

<

RX-485 RDS

>

.............................390 ohms

<

RX-385/385 RDS

>

......................330 ohms

Frequency Response (20 Hz to 20 kHz)

CD/TAPE/AUX..................................0±0.5 dB

RIAA Equalization Deviation

PHONO MM .....................................0±0.5 dB

Total Harmonic Distortion (20 Hz to 20 kHz)

PHONO MM to REC OUT (1V) ............0.02%
CD/TAPE/AUX to SP OUT

<

RX-485 RDS

>

(32.5W/8 ohms) ....................................0.02%

<

RX-385/385 RDS

>

(22.5W/8 ohms) ....................................0.02%

Signal-to-Noise Ratio (IHF-A Network)

PHONO MM (5 mV Input Shorted)........82 dB
CD/TAPE/AUX (Input Shorted) ...........105 dB

Residual Noise (IHF-A Network)............100 

µ

V

Channel Separation (Vol. –30 dB)

PHONO MM (Input Shorted 1 kHz) .......60 dB
CD/TAPE/AUX
(Input 5.1 k-ohms Terminated 1 kHz)....60 dB

Tone Control Characteristics

BASS: 

Boost/cut .................±10 dB (50 Hz)
(Turnover frequency)

...........................................(350 Hz)

TREBLE:

Boost/cut............±10 dB (20 kHz)

(Turnover frequency)

..........................................(3.5 kHz)

Continuous Loudness Control

...............................................– 30 dB (1 kHz)

(Level related equalization)

FM SECTION

Tuning Range

[U.S.A., Canada and General models]

........................................87.5 to 107.9 MHz

[Australia, Europe, U.K. and General
models] ...........................87.5 to 108.0 MHz

50 dB Quieting Sensitivity (IHF, 75 ohms)

<

RX-485 RDS/385

>

[Except Europe model]
Mono ...............................1.55 

µ

V (15.1 dBf)

Stereo ................................21 

µ

V (37.7 dBf)

<

RX-385 RDS

>

Mono ...............................1.55 

µ

V (15.1 dBf)

Stereo ................................21 

µ

V (37.7 dBf)

Usable Sensitivity (75 ohms)

(30 dB S/N Quieting, 1 kHz, 100% mod.)

<

RX-485 RDS/385

>

[Except Europe model]

............................................0.8 

µ

V (9.3 dBf)

DIN, Mono (S/N 26 dB) [Europe model]

.............................................................0.9 

µ

V

DIN, Stereo (S/N 46 dB) [Europe model]

..............................................................24 

µ

V

<

RX-385 RDS

>

[Except Europe and U.K. models]

............................................0.8 

µ

V (9.3 dBf)

DIN, Mono (S/N 26 dB)

[Europe and U.K. models] .................0.9 

µ

V

DIN, Stereo (S/N 46 dB) 

[Europe and U.K. models] ..................24 

µ

V

Image Response Ratio

<

RX-485 RDS/385

>

[Except Europe and U.K. models].......45 dB
[Europe model] ...................................80 dB

<

RX-385 RDS

>

[Except Europeand U.K. models]........45 dB
[Europe and U.K. models]...................80 dB

IF Response Ratio ...................................80 dB
Spurious Response Ratio ........................70 dB
AM Suppression Ratio .............................55 dB
Capture Ratio..........................................1.5 dB
Alternate Channel Selectivity 

<

RX-485 RDS/385

>

[Except Europe model] .......................85 dB

<

RX-385 RDS

>

[Except Europe and U.K. models].......85 dB

Selectivity (two signals, 40 kHz Dev.)

<

RX-485 RDS/385

>

[Europe model] ...................................70 dB

<

RX-385 RDS

>

[Europe and U.K. models]...................70 dB

Signal-to-Noise Ratio

<

RX-485 RDS/385

>

(IHF) Mono/Stereo 

[Except Europe model] .............80 dB/75 dB

(DIN-Weighted, 40 kHz Dev.) Mono/Stereo

[Europe model] .........................74 dB/69 dB

<

RX-385 RDS

>

(IHF) Mono/Stereo 

[Except Europe and U.K. models]

.................................................80 dB/75 dB

(DIN-Weighted, 40 kHz Dev.) Mono/Stereo

[Europe and U.K. models] ........74 dB/69 dB

Harmonic Distortion

<

RX-485 RDS/385

>

Mono/Stereo (1 kHz)

[Except Europe model] ................0.1/0.2%

Mono/Stereo (40 kHz Dev.)

[Europe model] ............................0.1/0.2%

<

RX-385 RDS

>

Mono/Stereo (1 kHz)

[Except Europe and U.K. models]

....................................................0.1/0.2%

Mono/Stereo (40 kHz Dev.)

[Europe and U.K. models] ...........0.1/0.2%

Stereo Separation 

<

RX-485 RDS/385

> 

(1 kHz)................50 dB

<

RX-385 RDS

>

[Except Europe and U.K. models] 
(1 kHz)...................................................50 dB
[Europe and U.K. models]
(40 kHz Dev.) ........................................50 dB

Frequency Response

20 Hz to 15 kHz...............................0 ±1.5 dB

AM SECTION

Tuning Range

[U.S.A., Canada and General models]

..........................................530 to 1,710 kHz

[Australia, U.K., Europe and General
models] .............................531 to 1,611 kHz

Usable Sensitivity ..............................100 

µ

V/m

Selectivity.................................................32 dB
Signal-to-Noise Ratio ...............................50 dB
Image Response Ratio ............................40 dB
Spurious Response Ratio ........................50 dB
Harmonic Distortion...................................0.3%

AUDIO SECTION

Output Level/Impedance

<

RX-485 RDS/385

>

FM (100% mod., 1 kHz)

[Except Europe model]

......................................500 mV/2.2 k-ohms

[Europe model (40 kHz Dev.)]

......................................400 mV/2.2 k-ohms

AM (30% mod., 400 Hz)
.........................................150 mV/2.2 k-ohms

<

RX-385 RDS

>

FM (100% mod., 1 kHz)

[Except Europe and U.K. models]

......................................500 mV/2.2 k-ohms

[Europe and U.K. models (40 kHz Dev.)]

......................................400 mV/2.2 k-ohms

AM (30% mod., 400 Hz)
.........................................150 mV/2.2 k-ohms

GENERAL

Power Supply

[U.S.A. and Canada models]

...........................................AC 120V, 60 Hz

[Australia and U.K. models]

...........................................AC 240V, 50 Hz

[Europe model] ...................AC 230V, 50 Hz
[General model]

.................AC 110/120/220/240V, 50/60 Hz

Power Consumption

<

RX-485 RDS

>

[U.S.A. model].....................................155W
[Canada model].....................250 VA, 205W
[Europe, Australia and General models]

............................................................135W

<

RX-385/385 RDS

>

[Canada model] ..................................170W
[U.S.A., Australia, Europe, U.K. and 
General models] .................................120W

AC Outlets

2 SWITCHED OUTLETS

[U.S.A., Canada, Europe and 
General models].................100W max. total

1 SWITCHED OUTLET

[Australia and U.K. models]

...........................................100W max. total

Dimensions (W x H x D)

..........................................435 x 126 x 298 mm

(17-1/8” x 4-15/16” x 11-3/4”)

Weight

<

RX-485 RDS

>

.............7.0 kg (15 lbs. 6 oz.)

<

RX-385/385 RDS

>

......6.1 kg (13 lbs. 7 oz.)

Accessories............................AM loop antenna

Indoor FM antenna

Remote control transmitter

Batteries

Specifications are subject to change without
notice.

Summary of Contents for 485RDS


























Reviews:

No comments

Related manuals for 485RDS

Danfoss RZ1 User Manual preview
RZ1
Brand: Danfoss Pages: 12
LaserLiner SensoPilot Pro Operating Instructions Manual preview
SensoPilot Pro
Brand: LaserLiner Pages: 40
LabSat 3 Wideband Quick Start Manual preview
3 Wideband
Brand: LabSat Pages: 2
Quark-Elec QK-A026+ Setup Manual preview
QK-A026+
Brand: Quark-Elec Pages: 2
RadioMaster ER8 Quick Start Manual preview
ER8
Brand: RadioMaster Pages: 2
AMG AMG3787E-1-DR-1550-HP Instruction Manual preview
AMG3787E-1-DR-1550-HP
Brand: AMG Pages: 12
Onkyo TX-8260 Instruction Manual preview
TX-8260
Brand: Onkyo Pages: 57
Sencor SCT 5051BMR User Manual preview
SCT 5051BMR
Brand: Sencor Pages: 17
Leica GMX902 GG User Manual preview
GMX902 GG
Brand: Leica Pages: 32
Proteco RX 4331 12-24V Installation And Use Manual preview
RX 4331 12-24V
Brand: Proteco Pages: 9
DAPAudio DF-12 Manual preview
DF-12
Brand: DAPAudio Pages: 17
Daewoo AXL-128 Service Manual preview
AXL-128
Brand: Daewoo Pages: 27
B&K AVR315 Owner'S Manual preview
AVR315
Brand: B&K Pages: 88
Icom IP501M Service Manual preview
IP501M
Brand: Icom Pages: 44
FrSky D4R-II User Manual preview
D4R-II
Brand: FrSky Pages: 2
CallingSYS ZJ-82 User Manual preview
ZJ-82
Brand: CallingSYS Pages: 8
AOR AR7000 Manual preview
AR7000
Brand: AOR Pages: 45
Audiovox Phase Linear UV7 Quick Start Manual preview
Phase Linear UV7
Brand: Audiovox Pages: 6

Brands by name

Popular brands

Load more brands